Rechercher

IEC/TR 62000:2010(E) provides guidelines indicating the items that should be taken into account when planning to connect: (1) different implementations of single-mode fibres of the same type, e.g. different implementations of type B single-mode fibres, and (2) single-mode fibres of different types, e.g. B1.1 with B4. The major technical changes with respect to the previous edition are…

ISO 28460:2010 specifies the requirements for ship, terminal and port service providers to ensure the safe transit of an LNG carrier through the port area and the safe and efficient transfer of its cargo. It is applicable to pilotage and vessel traffic services (VTS); tug and mooring boat operators; terminal operators; ship operators; suppliers…

ISO 13678:2010 provides requirements, recommendations and methods for the testing of thread compounds intended for use on threaded casing, tubing, and line pipe connections; and for thread compounds intended for use on rotary shouldered connections. The tests outlined are used to evaluate the critical performance properties and physical and chemical characteristics of thread compounds under…

IEC 61851-1:2010 applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network. It includes characteristics and operating conditions of the supply…

IEC 60368-3:2010 specifies the outline drawing for piezoelectric filters with lead enclosures. This edition includes the following significant technical changes with respect to the previous edition: a) four enclosure types (CF05, CF06, CF07 and CF09) have been deleted from previous edition, IEC 60368-3 Ed. 3.0; b) now standardized enclosures are totally 16 types. These are listed in Table.1.

ISO 14531-3:2010 specifies the physical properties and mechanical-performance requirements for full-end-load-resistant mechanical fittings for use in the connection of crosslinked polyethylene (PE‑X) pipes conforming to ISO 14531‑1 and in the construction of transition assemblies for joining PE‑X pipes to metal pipes having plain spigot, screw thread, compression socket and flange terminations.…

IEC 60601-2-8:2010 establishes particular basic safety and essential performance requirements for therapeutic X-ray equipment with nominal X-ray tube voltages in the range 10 kV to 1 MV when connected to alternating current supply mains. It includes the requirements for accuracy and reproducibility of performance to the extent that these are related to radiation quality and the quantity of…

Preface This is the seventh edition of CSA C22.2 No. 42, General use receptacles, attachment plugs, and similar wiring devices, part of a series of Standards issued by CSA International under Part II of the Canadian Electrical Code. This edition supersedes the previous editions, published in 1999, 1984, 1979, 1959, 1942, and 1937. Scope 1.1 This Standard applies to the following wiring…

ISO/IEC/IEEE 8802-15-4:2010 defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements typically operating in the personal operating space (POS) of 10 m.

ISO/IEC/IEEE 8802-15-4:2010 defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited battery consumption requirements typically operating in the personal operating space (POS) of 10 m.