Rechercher

This is the second edition of CAN/CSA-Z17510-2, Sleep apnoea breathing therapy - Part 2: Masks and application accessories, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 17510-2 (second edition, 2007-10-01). It supersedes the previous edition published in 2003 as CAN/CSA-Z17510-2 (adopted ISO 17510-2:2003…

This National Standard of Canada is based on International Standard ISO 17510-1:2007. 1 * Scope IEC 60601-1:1988, Clause 1 applies, except as follows. Amendment (add at the end of the Subclause 1.1): This part of ISO 17510 specifies requirements for equipment intended for sleep apnoea breathing therapy for domiciliary use, ships, aircraft and other transport vehicles and for use in…

ISO 8000-102:2009 contains the vocabulary relating to master data quality, for use in connection with the master data quality series of parts of ISO 8000. ISO 8000-102:2009 includes those terms and definitions referenced in published parts of ISO 8000 dealing with master data quality. It is therefore not a comprehensive lexicon for master data quality. ISO 8000-102:2009 includes terms and…

This International Standard applies to open-cycle gas-turbine power plants using combustion systems supplied with gaseous and/or liquid fuels as well as closed-cycle and semi-closed-cycle gas-turbine power plants. It can also be applied to gas turbines in combined cycle power plants or in connection with other heat-recovery systems. In cases of gas turbines using free-piston gas generators or…

ISO 22199:2010 specifies the emission limits and test conditions for lifts, escalators and passenger conveyors permanently installed in buildings. For conducted phenomena and harmonic distortion, ISO 22199:2010 is applicable to equipment intended to be connected to low-voltage systems interfacing with the public supply at the low-voltage level. It is not applicable to equipment intended to be…

Scope 1.1 General 1.1.1 Application This Standard deals with the following subjects: (a) electrical safety associated with health care provision; and (b) essential electrical systems for health care facilities. Note: See Clause 3 for the definition of "health care facility". 1.1.2 Exclusions 1.1.2.1 This Standard is not intended to apply to veterinary facilities, although its…

ISO/IEC 14165-321:2009(E) Fibre Channel is a high speed serial interface using either optical or electrical connections (i.e., the physical layer) at data rates currently up to 2 Gbits/s with a growth path to 10 Gbits/s, and provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command…

ISO/IEC 14165-321:2009(E) Fibre Channel is a high speed serial interface using either optical or electrical connections (i.e., the physical layer) at data rates currently up to 2 Gbits/s with a growth path to 10 Gbits/s, and provides a general data transport vehicle for Upper Level Protocols (ULPs) such as Intelligent Peripheral Interface (IPI) and Small Computer System Interface (SCSI) command…

IEC 61000-4-34:2005+A1:2009 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This standard applies to electrical and electronic equipment having a rated input current exceeding 16 A per phase. It covers equipment installed in…

La CEI 61000-4-34:2005+A1:2009 définit les méthodes d'essai d'immunité ainsi que la gamme des niveaux d'essais préférés pour les matériels électriques et électroniques connectés à des réseaux d'alimentation basse tension pour les creux de tension, les coupures brèves et les variations de tension. La présente norme s'applique aux matériels électriques et électroniques dont…