Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 1: Specif...
ISO 11363-1:2010 specifies dimensions and tolerances for taper screw threads of nominal diameter 17,4 mm (designated 17E) and 25,8 mm (designated 25E) used for the connection of valves to gas cylinders.
It does not cover the connection requirements for:
mechanical strength;
gas tightness;
capability of repeated assembly and dismounting operations.
Gauge inspection is covered by ISO 11363-2.
Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspec...
ISO 11363-2:2010 specifies types, dimensions and principles of use of gauges, to be used in conjunction with the taper threads specified in ISO 11363-1 (i.e. 17E and 25E threads).
It provides examples of calculations for thread gauge dimensions on the large end diameter and draws attention to the limitations of the gauging system specified.
1 Scope
1.1 The requirements of this Standard apply to manually operated, general-use snap switches for
connection to copper (Cu) or copper-clad conductors used in accordance with the National Electrical
Code(NEC), ANSI/NFPA 70, or the Canadian Electrical Code (CEC), Part I, and intended for connection
to wiring systems recognized by the NEC or the CEC, Part I. In Canada, requirements for…
Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for ci...
IEC 61076-2-107:2010 describes circular M12 connectors typically used for industrial process measurement and control. These connectors consist of fixed and free connectors with screw-locking as well as adaptors. The connectors are suitable to connect two optic fibres and two electrical wires intended for power transmission to the optionally integrated transmitter and receiver, not specified in…
Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-107: Spécification part...
La CEI 61076-2-107:2010 décrit les connecteurs circulaires M12, généralement utilisés dans le domaine des mesures et commandes dans les processus industriels. Ces connecteurs se composent d'embases et de fiches à vis ainsi que d'adaptateurs. Ces connecteurs sont conçus pour connecter deux fibres optiques et deux fils électriques destinés à alimenter l'émetteur et le récepteur…
Information technology — Enhanced communications transport protocol: Specification of QoS management...
ISO/IEC 14476-6:2010 provides a specification of QoS management for accomplishing a desired quality of service in n-plex multicast transport connections. For this purpose, it describes the QoS management operations in n-plex multicast transport connections such as QoS negotiation, QoS monitoring and QoS maintenance. ISO/IEC 14476-6:2010 is an integral part of ECTP-5 (ITU-T Rec. X.608 | ISO/IEC…
Information technology - Enhanced communications transport protocol: Specification of QoS management...
ISO/IEC 14476-6:2010 provides a specification of QoS management for accomplishing a desired quality of service in n-plex multicast transport connections. For this purpose, it describes the QoS management operations in n-plex multicast transport connections such as QoS negotiation, QoS monitoring and QoS maintenance. ISO/IEC 14476-6:2010 is an integral part of ECTP-5 (ITU-T Rec. X.608 | ISO/IEC…
Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/qua...
IEC 61156-2:2010(E) defines individually screened or unscreened pair/quad cables, with or without overall common screen for horizontal floor wiring. These cables are suitable for the various communication systems for which the reference is given in the relevant detail specification. The cables covered by this sectional specification are intended to operate with voltages and currents normally…
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - De...
IEC 61076-3-118:2010 establishes specifications and test requirements for a connector with four contacts plus PE contact, for use in industrial environments. This standard also specifies free and fixed connectors, with round contacts, suitable for screw or crimp terminations. Other terminations techniques, as solder or printed board connections are upon agreement between manufacturer and user.…
Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-118: Connecteurs rectan...
La CEI 61076-3-118:2010 établit des spécifications et des exigences d'essai relatives à un connecteur comportant quatre contacts plus un contact PE, utilisé dans les environnements industriels. La présente norme internationale spécifie les fiches et les embases, comportant des contacts arrondis, disponibles avec des raccordements à vis ou serties. D'autres techniques de raccordements,…
