Rechercher

IEC 80601-2-58:2014 applies to the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery and associated accessories that can be connected to this medical electrical equipment, hereafter referred to as ME equipment. Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this standard are not…

L'IEC 61753-031-2:2014 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles il convient qu'un dispositif de couplage indépendant de la longueur d'onde (NWBD) satisfasse afin d'être classé comme conforme aux exigences de la présente norme IEC.Ces exigences couvrent les dispositifs de couplage indépendants de la longueur d'onde…

1 SCOPE 1.1 These requirements cover discrete electrical control units, communication units, transport products which manipulate the data packets, interfaces, and accessories for mass notification systems. 1.2 The products covered by this standard are intended to be used in combination with other appliances and devices to form an emergency communication and/or mass notification system. These…

This part of ISO 10079 specifies safety and performance requirements for medical suction equipment powered from a vacuum or positive pressure gas source generating venturi suction. It applies to equipment connected to medical gas pipeline systems or cylinders and venturi attachments. Annex D illustrates the three parts of ISO 10079 by providing a schematic for typical systems. The equipment can…

1 Scope 1.1 This Standard applies to expandable sleeving rated at 90°C, 105°C, 125°C, 150°C and 200°C for bundling of insulated wires and cables, intended for the use in equipment designed to be installed and used in accordance with the rules of the Canadian Electrical Code, Part I (CE Code). The product consists of an open weave design of polymeric monofilaments. 1.2 This Standard does not apply…

IEC 62751-2:2014 gives the detailed method to be adopted for calculating the power losses in the valves for an HVDC system based on the "modular multi-level converter", where each valve in the converter consists of a number of self-contained, two-terminal controllable voltage sources connected in series. It is applicable both for the cases where each modular cell uses only a single turn…

IEC PAS 80005-3:2014(E) describes low voltage shore connection (LVSC) systems, on board the ship and on shore, to supply the ship with electrical power from shore. This PAS is applicable to the design, installation and testing of LVSC systems and addresses: - LV shore distribution systems; - shore-to-ship connection and interface equipment; - transformers/reactors; - semiconductor/rotating…

ISO 7240-28:2014 specifies requirements, methods of test, and performance criteria for fire protection control equipment (FPCE) connected to automatic fire protection equipment (AFPE) installed in buildings. The FPCE receives signals from fire detection control and indicating equipment, sends control signals to, and indicates the condition of, the AFPE. The control signals are used to initiate…

IEC 61158-6-2:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-2, and define the externally visible behavior associated with their transfer. This standard specifies the protocol of the Type 2 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (…