Dentistry — Screw loosening test using cyclic torsional loading for implant body/implant abutment co...
ISO/TR 18130:2016 provides guidelines for a method to determine the extent of screw loosening of the metallic implant body/implant abutment joint of endosseous dental implants, such as two-part implants or multi-part implants under cyclic torsional loading. This test is most appropriate for evaluating new types of joints fixed using screw(s) and metallic connecting parts. This Technical Report…
Devices for the connection of luminaires for household and similarpurposes - Part 2: Standard sheets...
IEC 61995-2:2009+A1:2016 which is to be read in conjunction with IEC 61995-1, applies to devices for the connection of luminaires (DCL) 250 V, 6 A a.c. intended for household and similar purposes, for the electrical connection to final circuits rated not more than 16 A, without providing mechanical support for the luminaire.
This publication is to be read in conjunction with IEC 61995-1:2005.…
Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requir...
ISO 8528-8:2016 defines design requirements, minimum performances and type tests for low-power generating sets driven by reciprocating internal combustion engines for land and marine use (domestic, recreational and industrial application), excluding generating sets used on aircraft.
It concerns mainly low-power generating sets driven by reciprocating internal combustion engines for the generation…
Connectors for outdoor gas appliances and manufactured homes
1.1
This Standard applies to newly produced assembled connectors constructed entirely of new, unused
parts and materials. Such connectors are intended for exterior use above ground for making the
following non-rigid connections:
a) between the gas supply and the gas inlet of an appliance for outdoor installation that is not
frequently moved after installation. These connectors are not…
Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 a...
1.1 Purpose
The purpose of this Standard is to provide minimum requirements for the design, construction, and
marking of electrical equipment or parts of such equipment for use in Class I and Class II, Division 2 and
Class III, Divisions 1 and 2 hazardous (classified) locations.
This equipment, in normal operation, is not capable of causing ignition of the surrounding atmosphere
under the…
STANDARD FOR COMPOUNDS AND TAPES FOR THREADED PIPE JOINTS
Scope:
This Standard sets forth minimum requirements for the determination of the acceptability of pipe joint compounds and tapes for piping systems intended for the containment of alcohol, alcohol fuel blends, natural gas and methane, oxygen, petroleum distillates, propane and butane, steam, and water (potable and non-potable).
Unless otherwise specified, products meeting this Standard are…
Information technology — Biometrics used with mobile devices
ISO/IEC TR 30125:2016 provides guidance for developing a consistent and secure method of biometric (either alone or supported by non-biometric) personalization and authentication in a mobile environment for systems procured on the open market.
Guidance is provided for
- 1:1 verification or 1:few positive identification;
- biometric sample capture in the mobile environment where…
Information technology - Biometrics used with mobile devices
ISO/IEC TR 30125:2016 provides guidance for developing a consistent and secure method of biometric (either alone or supported by non-biometric) personalization and authentication in a mobile environment for systems procured on the open market.
Guidance is provided for
- 1:1 verification or 1:few positive identification;
- biometric sample capture in the mobile environment where…
Electrically propelled road vehicles — Specification of voltage sub-classes for voltage class B
ISO/PAS 19295:2016 provides specification of voltage sub-classes for electric propulsion systems and conductively connected auxiliary electric systems of electrically propelled road vehicles.
The voltage sub-classes are related to d.c. electric circuits.
It applies only to electric circuits and components with maximum working voltages according to voltage class B.
ISO/PAS 19295:2016 provides…
