Rechercher

ISO/IEC 19944:2017 - extends the existing cloud computing vocabulary and reference architecture in ISO/IEC 17788 and ISO/IEC 17789 to describe an ecosystem involving devices using cloud services, - describes the various types of data flowing within the devices and cloud computing ecosystem, - describes the impact of connected devices on the data that flow within the cloud computing…

IEC 60598-2-22:2014+A1:2017 specifies requirements for emergency luminaires for use with electrical lamps on emergency power supplies not exceeding 1 000 V. This fourth edition cancels and replaces the third edition published in 1997, AMD1:2002 and AMD2:2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the…

IEC 61643-32:2017 describes the principles for selection, installation and coordination of SPDs intended for use in Photovoltaic (PV) systems up to 1 500 V DC and for the AC side of the PV system rated up to 1 000 V rms 50/60 Hz. The photovoltaic installation extends from a PV array or a set of interconnected PV-modules to include the associated cabling and protective devices and the inverter up…

IEC 61643-32:2017 décrit les principes de choix, d'installation et de coordination des parafoudres destinés à être utilisés dans les systèmes photovoltaïques (PV) jusqu'à une tension maximale de 1 500 V en courant continu, et en courant alternatif dans un système photovoltaïque d’une tension assignée maximale de 1 000 V en valeur efficace sous une fréquence de 50 Hz/60 Hz. Une…

ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. ISO 10848-3:2017 specifies laboratory and field measurements of buildings for Type B elements (defined in ISO 10848‑1) when the junction has a substantial influence. Laboratory measurements are used to quantify the performance of the junction with suppressed…

ISO 22829:2017 specifies additional requirements to those given in ISO 5826 for single-phase inverter transformers with connected rectifier for DC welding. This document applies to transformers, primarily used in welding guns, operating at 1 000 Hz with a rated input voltage of 500 V or more. The requirements of ISO 5826 shall be followed unless amended by this document.

ISO 22829:2017 spécifie des exigences supplémentaires à celles données dans l'ISO 5826 pour les transformateurs onduleurs monophasés avec un redresseur connecté pour les soudures à courant continu. Le présent document s'applique aux transformateurs, principalement utilisés dans les pistolets de soudage sous une fréquence de 1 000 Hz avec une tension d'entrée nominale de 500 V ou…

ISO/IEC 29341-26-10:2017 is compliant with [1]. It defines a service type referred to herein as the CallManagement service. The CallManagement service is a UPnP service that allows control points to use the telephony features(e.g., voice call, video call, and data transfer etc.) provided by a Telephony Server (TS). The CallManagement service enables the following features to a Telephony Control…

ISO/IEC 29341-20-10:2017 is compliant with UPnP Device Architecture version 1.0 [14]. This service type enables control over the transport of audio and video streams. The service type defines a common model for A/V transport control suitable for a generic user interface. It can be used to control a wide variety of disc, tape and solid-state based media devices such as CD players, VCRs and MP3…

ISO/IEC 29341-20-11:2017 is compliant with the UPnP Device Architecture version 1.0 [14]. This service-type enables modeling of streaming capabilities of A/V devices, and binding of those capabilities between devices. Each device that is able to send or receive a stream according to the UPnP AV Architecture will have 1 instance of the ConnectionManager service. This service provides a mechanism…