Rechercher

This document defines the general minimum specifications of a single-pole connection interface, linking the in-vehicle Ethernet device and harness connector built into a road vehicle.

This document specifies the test method for the determination of aldehydes in propylene oxide for industrial use by high performance liquid chromatography. This document is applicable to the determination of the four aldehydes in industrial propylene oxide, including formaldehyde, acetaldehyde, propionaldehyde, acrolein. The concentration ranges from 1 mg/kg to 100 mg/kg, and the content of…

This document specifies the apparatus and procedure for measuring reaction to fire behaviour under reduced oxygen atmospheres. Continuous measurements are made to calculate heat release rates, smoke and specific gas production rates, and mass loss rates. Ignition time measurements are also made and ignition behaviour is obtained. Pyrolysis parameters of specimens exposed to controlled levels of…

This document specifies a method for determination of carbon monoxide (CO) in the vapour phase of Heated Tobacco Products (HTP) using puffing regimes defined for this category of products. The part one will address the CO determination of electrically Heated Tobacco Product (eHTP).

This document specifies a test method for the determination of propylene oxide and trace impurity in industrial propylene oxide by capillary gas chromatography. This document is suitable for the determination of propylene oxide with a purity of no less than 95% (mass fraction) and of trace impurity in the concentration range of 0.0001%~1.000% (mass fraction).

This document describes methods of evaluating the resistance of vulcanized and thermoplastic rubbers to the action of liquids by measurement of properties of the rubbers before and after immersion in test liquids. The liquids concerned include current service liquids, such as petroleum derivatives, organic solvents and chemical reagents, as well as reference test liquids.

This document specifies the general requirements for determining the equilibrium temperature of natural gas hydrate in the laboratory, and describes the test methods, instruments, materials and experimental data processing methods of the equilibrium temperature of natural gas hydrate under constant volume conditions.

Le présent document s'applique à la sécurité de base et aux performances essentielles d'un économiseur d'oxygène, désigné ci-après sous le terme d'appareil EM, ainsi que de ses accessoires prévus pour économiser le supplément d'oxygène en délivrant du gaz de manière intermittente et synchronisée en suivant le cycle d'inspiration du patient, pour une utilisation dans…

This document applies to stress and/or force-controlled thermo-mechanical fatigue (TMF) testing. Both forms of control, force or stress, can be applied according to this document. This document describes the equipment, specimen preparation, and presentation of the test results in order to determine TMF properties.

ISO 19697:2016 specifies the performance requirements, methods of testing and test results of electronic inclinometers required by the performance standard, IMO resolution MSC.363 (92), in addition to the general requirements contained in resolution A.694 (17) and is associated with IEC 60945. The electronic inclinometers provide information about actual heel angle, roll amplitude, roll period to…