Rechercher

This document aims at providing general utilization requirements and recommendations and calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft during flight: a) cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into…

This document specifies a service architecture that defines the framework and domain for classification of probe vehicle systems (PVS), which are systems that collect probe data from private vehicles and that process the probe data statistically towards useful information that finally can be provided to end users. This document focuses on services that can be developed using public sector probe…

1 Scope 1.1 This Standard applies to a) electrostatic air cleaners intended to remove dust and dirt from the air and intended for general indoor residential and commercial use; b) air ionizer type air cleaners; c) other similar ionizing equipment; and d) duct-mounted type electrostatic air cleaners, air ionizers, and other similar ionizing equipment intended for general indoor…

1 Scope 1.1 This Standard specifies the technical requirements for the interconnection of distributed energy resources (DER) and distribution systems up to 50 kV line to line at the point of common coupling (PCC). 1.2 This Standard does not define the maximum DER capacity or the upper voltage limit for installations that are interconnected with a single PCC or connected to a given feeder.…

1 Scope 1.1 Purpose The purpose of this Standard is to establish criteria for the design, manufacture, testing, inspection, installation, maintenance, use, and operation of vehicle-mounted aerial devices installed on a chassis, primarily used to position personnel, and for the training of operators for that equipment, to achieve the following objectives: a) prevention of personal injuries and…

1 Scope 1.1 General This document is the base standard for a number of other standards dealing with water treatment equipment, water, dialysis water, concentrates, and dialysis fluid (ISO 23500 series) and provides dialysis practitioners with guidance on the preparation of dialysis fluid for haemodialysis and related therapies and substitution fluid for use in online therapies, such as…

1 Scope This document specifies minimum requirements for concentrates used for haemodialysis and related therapies. This document is addressed to the manufacturer of such concentrates. In several instances in this document, the dialysis fluid is addressed, which is made by the end user, to help clarify the requirements for manufacturing concentrates. Because the manufacturer of the…

1 Scope 1.1 This Standard describes a method for the determination of the glass transition temperature (Tg) of kraft lignin. The procedure utilizes differential scanning calorimetry (DSC). This procedure is applicable to solid lignins (e.g., powdered form) isolated from the kraft pulping process. It does not apply to raw black liquor and lignin in the sodium form produced from the kraft…

1 Scope 1.1 This Standard describes the thermal analysis of kraft lignin using thermogravimetric methods. Thermogravimetry can be used to determine the initial decomposition temperature(s), rate(s) of decomposition, and the temperature at maximum decomposition of various materials, including lignins at atmospheric pressure. All these temperatures are solely based on the mass loss and are not…

1 Scope 1.1 General This Standard specifies testing and labelling requirements for hip protectors used to reduce the risk of hip fracture in the event of a fall. Annex A provides a test method for measuring the effect of a hip protector in reducing the force to the proximal femur during a simulated fall. The test method is applicable both to hip protectors that are designed to withstand a…