Rechercher

This proposal is the third of three separate, but linked, proposals. The deliverable consists of documentation that defines the processes and models for data exchange in agricultural irrigation. The scope of the set of three proposals is based on two major irrigation data processes: 1. Observations: The field, atmospheric, plant, or other in situ measurements that apply to irrigation management…

This proposal is the third of three separate, but linked, proposals. The deliverable consists of documentation that defines the processes and models for data exchange in agricultural irrigation. The scope of the set of three proposals is based on two major irrigation data processes: 1. Observations: The field, atmospheric, plant, or other in situ measurements that apply to irrigation management…

The primary objectives of this guideline are to present a standard method for avoiding galvanic corrosion in the design stage, to present a standard method for determining whether actual corrosion damage was caused by galvanic corrosion, and to present a guideline for standard methods for suppressing galvanic corrosion that occurs in the presence of an electrolyte when two or more different types…

This International Standard establishes process to measure native vegetation that is being logged in native tropical areas following a management forest plan. Such process includes quantification and monitoring of the area explored to support the analysis of the chain of custody, helping to insure the legal origin of the logged material. This International Standard proposes to establish…

ISO 13347-3:2004 applies to industrial fans as defined in ISO 5801 and ISO 13349. It is limited to the determination of airborne sound emission for the specified set-ups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined. The sizes of fan which can be tested in accordance with ISO 13347-3:2004 are limited only by the practical aspects of…

This part of ISO 3630 specifies requirements and test methods for the accuracy of electronic apex locators that are used to determine the apical foramen (‘apex’ in this document) location during endodontic treatment. Integrated types of electronic apex locators are excluded from this standard.

This document specifies the minimum requirements for airworthiness approval of air cargo pallets, nets and containers, generally designated as air cargo unit load devices (ULD). This document is intended to provide a uniform technical reference for air cargo unit load devices approval. As a prerequisite, it is presupposed that the applicable general civil aviation requirements and the aircraft…

The scope is equivalence validation of product data. Product data may travel between two or more IT systems during design and manufacturing processes. Data translation is applied as necessary during that travel. Or product data may be reused after long-term data retention. In these scenarios, validation of whether or not translated product data can be regarded as equivalent to the product data…

This document specifies test methods for the determination of the percentage of defective particles and of the microstructure of metallic blast-cleaning abrasives. This is one of a number of parts of ISO 11125 dealing with the sampling and testing of metallic abrasives for blast-cleaning. The types of metallic abrasive and requirements on each are contained in the various parts of ISO 11124. The…