1. SCOPE
1.1 This Standard applies to complete, flue-connected, oil-fired warm air
appliances, irrespective of the heating capacity or the type of burner used.
1.2 The requirements given herein apply to appliances intended for
installation with the appliance base placed upon the floor, except as provided
for in Clause 1.4; and intended to be used with pipes or ducts for the…
Aircraft — Fire-resisting electrical cables — Methods of test
Specifies the tests suitable for establishing the compliance of cables with the performance requirements stated in ISO 2155. Is intended to serve as a basis for test specifications to be included in the relevant national standards when the Official Board of Inspection considers that existing tests are inadequate. The tests are classified in type tests only, type tests and routine productions…
Brown coals and lignites — Classification by types on the basis of total moisture content and tar yi...
Brown coals are classified in this International Standard according to the following properties: total moisture content calculated on the ash-free basis; tar hiels calculated on the dry, ash-free basis. In tables class numbers, group number and code numbers of brown coal types are given.
Methods for for measuring the performance of electric clothes washing machines for household use
States and defines test methods of interest to the users for measuring the principal performance characteristics of household electric washing machines.
This standard is concerned neither with safety nor with performance requirements.
This standard is applicable to horizontal drum type electric clothes washing machines, to spin extractors and to washing and spinning machines for household use.
It…
Dimensions of clevis and tongue couplings of string insulator units
Applies to string insulator units of the can and pin type and also of the long rod type as well as to the fittings used with such insulators. Defines dimensions of a series of clevis and tongue couplings to permit the assembly of insulators or fittings supplied by different manufacturers.
Note: - For co-ordination between standardized dimensions and strength classes of cap and pin type…
Third supplement: Instrumentation of gas-cooled graphite-moderated reactors
Applicable more particularly to instrumentation for gas-cooled graphite-moderated reactors, Type 1: reactors having metallic natural uranium fuel clad with magnesium alloy, and Type 2: reactors having enriched uranium oxide fuel clad with stainless steel. The IEC 60231 series of standards is no longer up-to-date and will not be revised by IEC. The standards are maintained for the time being for…
Paints and varnishes — Bend test (cylindrical mandrel)
Empirial test procedure for assessing the resistance of a single coating or for a multicoat system to cracking and/or detachment from a metal substrate when subjected to bending round a cylindrical mandrel under standard conditions. The method of test specified may be carried out either with a single specified size of mandrel or by repeating the procedure using successively smaller mandrels. Two…
Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and co...
Specifies the standard method to be used in comparing the contrast ratios given by paint films of white or ligth colours, of refelctance factor greater than 40 %, dried at normal air temperature and applied at approximately equal wet film thickness to black and white substrates. The wet film thickness selected, approximately 50 um, corresponds to a spreading rate of approximately 20 m2/l. Because…
Fire Alarm Devices, Single and Multiple Station, Mechanically-Operated Type
1.1
These requirements cover heat actuated mechanically operated single- and
multiple-station fire alarm devices intended for indoor installation in
accordance with the Standard for Household Fire Warning Systems, NFPA No. 74.
1.2
The requirements do not cover electrically operated single- or multiple-station
fire alarm devices actuated by heat, smoke, or combustion products.
Cable for Luminous Tube Signs and for Oil and Gas Burner Ignition Equipment
1. SCOPE
1.1 This Standard applies to single conductor cables intended for installation
in accordance with the Rules of the Canadian Electrical Code, Part I, as
follows:
(a) Type GTO cables for use with gas-tube systems for signs, outline
lighting, and interior lighting, and for use also in the ignition
systems of oil- and gas-burning equipment; and…