1. SCOPE
1.1 This Standard applies to neutral supported cables, Type NS-1 which is
intended for use on systems having nominal voltages of 300 volts and less and
not required to be flame retardant, and Type NSF-2 which is intended for use on
systems having nominal voltages of 600 volts and less and required to be flame
retardant, in accordance with the Canadian Electrical Code, Part I.…
Textiles — Woven fabrics — Measurement of width of pieces
Two methods are specified for the determination of the width of pieces (of any length) of woven fabrics that are in the state of relaxation obtained by exposure (free from applied tension) to the standard atmosphere for testing textiles. The methods are applicable to woven fabrics (including those of "stretch" type) with a minimal width of 10 cm made up full width or folded down the…
Specifies the objective criteria which make it possible to assess the value of the results obtained in each particular case. It is not intended to prescribe a type of apparatus or a procedure for converting the instrument response to concentrations units because of the broad range of equipment available and the difficulty of completely specifying all working conditions in a spectrographic…
Scope
This standard describes the procedure recommended for application of cutback ashphalt plastic cement covered by 37-GP-5Ma intended for use as a general utility cement for filling and sealing joints in masonry, wood or metal building construction, for sealing and coating flashing around buildings, for embedding glass, and for repairing leaks and cracks of all types and for tabbing down…
Single-Phase Submersible Distribution Transformers, Type ONAN
1. Scope
1.1 This Standard covers the features of single-phase submersible transformers. For other details, reference shall be made to CSA Standard C2, Single-Phase and Three-Phase Distribution Transformers Types ONAN and LNAN, hereinafter referred to as CSA Standard C2. Note: See Appendix A, Recommendations for Corrosion Control of Submersible Transformer Installations, which covers…
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Slots, projections and cart...
This International Standard specifies the dimensions and location sf cartridge Slots, projections and a hole for the Model II 8 mm Type S film Camera cartridge which, when included by the manufacturer, automatically preset some cameras in accordance with the effective film Speed, and insert or withdraw a colour-balancing f ilter. The combinations which are possible, together with the area…
Scope
1.1 This standard applies to two types of gasoline suitable for use in automative and spark ignition engines operating under all climatic conditions.
Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm T...
This International Standard specifies the location and dimensions of the image area produced by the camera aperture on 8 mm Type R motion-picture film, and the dimensions of the maximum film image area intended for projection.
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Cartridge fit and take-up c...
This International Standard specifies the external dimensions of the 8 mm Type S film Camera cartridge, Model I 1, cartridge-Camera fit specifications, and core dimensions.
Swimming-Pool Luminaires, Submersible Luminaires and Accessories
1. Scope
1.1 This Standard applies to portable and stationary, incandescent and electric-discharge-lamp (fluorescent, mercury- and sodium-vapour) luminaires of the swimming-pool type and of the submersible type intended for use in other than swimming pools. The luminaires are for connection to a supply circuit of 150 v olts and less between conductors, designed to be installed and used in…
