Rechercher

1 Scope O112.0 1.1 This Standard contains certain standard test procedures and general requirements relating to the evaluation of wood adhesives in conformance with the O112-M Series of CSA Standards for Wood Adhesives. This Standard does not include special test methods which are peculiar to a particular adhesive and which are included in the appropriate material Standard. O112.1…

Specifies mandatory and optional markings of general purpose valves and states the manner of applying the markings, i.e. on the body, on a flange, or on a identification plate. Markings on the body may be integral with the body or on a plate securely fixed to the body. The table lists those items which may be included in international standards for individual types of valves.

1. Scope 1.1 This Standard provides minimum requirements for mineral fibre, for use primarily in the insulation of dwellings and other heated building structures, and defines the types in current use. This Standard does not apply to preformed insulation less than 40 mm in thickness.

This standard for embossed credit cards defines the physical specifications of the card, type fonts, location and dimensions of the embossed data and an account numbering system. It further specifies the procedure by which card issuer identifiers shall be registered and promulgated for the information and use of all concerned.

Sets out rules to ensure that translations are presented in a standard form which will simplify their use by different categories of user. Applies to the translation of all documents, whether the translation is complete, partial or abridged. Four types of translation are discussed.

1. Scope 1.1 This Standard sets forth the characteristics of an instrument conforming to C.I.S.P.R. requirements for the measurement of electromagnetic interference, both conducted and radiated, in the frequency range 0.15 MHz - 1000 MHz, as set for th in related CSA Standards on Tolerable Limits of Electromagnetic Interference. The frequency range, methods of use, and tolerable limits are…

This standard concerns r.f. coaxial connectors for use with r.f. cables, both flexible and semi-rigid, with air dielectric interface and high mechanical stability to withstand severe environmental exposure. The connectors provide low reflection in the microwave region up to 14 GHz and they are watertight and air-tight against a pressure difference of 3 bar.

Applies to string insulator units of the can and pin type and also of the long rod type as well as to the fittings used with such insulators. Defines dimensions of a series of clevis and tongue couplings to permit the assembly of insulators or fittings supplied by different manufacturers. Note: -For co-ordination between standardized dimensions and strength classes of cap and pin type insulators…

Characteristics of the 'parallel highway' for the CAMAC instrumentation and interface system described in IEC 60516. This highway provides for the high-speed transfer of data between CAMAC crates and computers or other controllers and for the interconnection of CAMAC crates in multicrate systems. Signal, timing and logical organization. Appendix: specifications of a standard crate…

Scope 1.1 This Standard defines fall arresting safety belts of the tongue buckle type and lanyards. It may be applied to an assembly consisting of a belt with an attached lanyard, or to a belt alone, or to a lanyard alone. Note: Requirements for quick-release and friction buckle types of belts are under study. 1.2 The equipment specified…