Rechercher

This Standard applies to two types of gasoline to which no lead or phosphorus have been added and are therefore suitable for use under all climatic conditions in spark ignition engines equipped with emission control systems requiring the use of unleaded gasoline. In the interest of conservation of petroleum products it is essential that engine manufacturers continue to design engines to…

Specifies the main fixing dimensions for interchangeable shovels designed to fit tines which conform to a type specified in this standard. applies to the lower portion of tines for fixing of various types of shovels having a working width of up to 400 mm. The following fixing types are specified: type 1 - one hole; - type 2 - two holes; type 3 - two holes, heavy type.

This standard applies to trimmed drawing sheet sizes intended for the preparation of all types of technical drawings. Details of other aspects of the preparation of technical drawings can be found in Canadian Standards Association Standard B78.1 - Mechanical Engineering Drawing Standards, Drafting Practices - General Principles.

1. Scope 1.1 The symbols contained in this Standard are intended for those who prepare or use electrical wiring and layout diagrams associated with architecture and building construction. These symbols have purposely been made simple and are not intended in any way to depict the structure of the particular devices shown. 1.2 It is not the…

1. SCOPE 1.1 This standard applies to vernier and dial type calipers and gages reading to 0.02 mm, for precision measuring. Verniers and gages in accordance with this standard shall be graduated with the International System of Measurement (SI) Units.

1. Scope 1.1 This standard applied to screw type micrometer calipers for measuring external and internal dimensions, thickness of tubing walls, and to micrometer depth gages. Calipers and gages in accordance with this standard shall be graduated with the International System of Measurement (SI) Units.

1.1 Scope 1.1.1 This standard applies to unvented portable type gas refrigerators intended for use either indoors or outdoors with propa ne and butane gases. For the purpose of this standard, indoors refers to a confined space in tents, recreational vehicles, cottages, fishing huts, cabins and other similarly enclosed areas. 1.1.2 This standard applies to portable type gas…

Covers the writing, typing, and printing of dates and times when all-numeric forms are used, and is applicable for general use. It is more restrictive than, but is not in conflict with, the relevant ISO standards. It departs from International Standard ISO 3307, Information interchange Representations of time of the day, only in that the use of 24:00:00 is permitted in addition to 00:00:…

Specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltages. The standard provides for the determination of erosion when required. Test results cannot be used directly for the evaluation of safe creepage distances when designing…

Specifies the method which is essentially the same as that described in CISPR publication 11, sub-clause 5.2.2. With this method, emphasis has been laid on simplicity and reproducibility, rather than on rigorous scientific method. lt has been purposely developed for use in an ordinary laboratory room to avoid the use of an expensive anechoic room. The method is intended for type tests but it may…