Rechercher

Applies to portable hand-held fuel and electrically powered chain saws. It describes safety requirements for the design of chain saws and includes recommendations pertaining to their safe operation. In addition to meeting the applicable requirements of this Standard, electrically powered (Type 2) chain saws shall also comply with the requirements specified in CSA Standard C22.2 No. 147.

Permits a variety of positioning devices which respond to a linear motion to be mounted on the actuator of a control valve, either directly or by employing an intermediate mounting bracket. The standardized mounting applies to positioners which are mounted on the side of the actuator, to those actuators which have a travel of 100 mm or less, and is designed to cover three basic types of actuator…

Provides basic mating and performance information for a subminiature coaxial connector with butting polytetrafluoroethylene (PTFE) dielectric interface for use with flexible and semi-rigid r.f. cables. The connectors are usable up to a frequency of 35 GHz. Only the interface dimensions are standardized. Other technical data are supplied for guidance only.

Provides basic mating and performance information for subminiature coaxial connectors with overlapping polytetrafluoroethylene (PTFE) dielectric interface for use with flexible and semi-rigid r.f. cables. The connectors are usable up to a frequency of 3 GHz. Only the interface dimensions are standardized. Other technical data are supplied for guidance only. The contents of the corrigendum of…

Provides basic mating and performance information for a subminiature coaxial connector for use with flexible and semi-rigid r.f. cables. The connectors are usable up to a frequency of 6 GHz. Only the interface dimensions are standardized. Other technical data are supplied for guidance only.

Standardizes the interface and ratings of two versions of a medium size r.f. connector for use with flexible and semirigid cables. The connectors are recommended to be utilized in medium power and low reflection applications up to 11 GHz. The dielectric filled interface is especially beneficial in applications involving severe environmental exposure. Both versions of this connector type are screw…

This International Standard specifies the dimensions of two types of 16-tooth intermittent sprockets for 35 mm motionpicture projectors. This International Standard is applicable to sprockets used in conjunction with film perforated in accordance with IS0 491.

Gives standards for the following categories of field-effect transistors : -Type A: junction-gate type; -Type B: insulated-gate depletion type; -Type C: insulated-gate enhancement type.

Gives the standard values for the diameters, heights and wall thickness of planchets made in well flat and dish-type configurations.

1. Scope 1.1 This Standard covers the details of construction, performance, and test for portable and stationary electrical instruments for sensing the presence of combustible gas or vapour concentrations in air, parts of which may be installed or us ed in Class I hazardous locations and gaseous mines in accordance with the Rules of the Canadian Electrical Codes, Parts I and V. 1.2…