Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 6371 - 6380 de 6754
Child safety and standards - General guidelines
This Guide establishes basic safety principles for technical bodies preparing national and international standards for products which are intended specifically for use by children; these principles should also apply to products with which children are likely to come into contact. The following aspects are considered: ergonomic considerations, toxicity, flammability and thermal injuries, ingestion…
Éditeur :
IEC
Statut :
Révisé
Date de publication :
1987-03-31
Code(s) de l'ICS :
01.120; 97.190
Non-incendive Electrical Equipment for Use in Class 1, Division 2 Hazardous Locations
1. Scope 1.1 This Standard applies to process measurement and control equipment that has been designed and assessed for use either in, or in conjunction with, Class I, Division 2 hazardous locations as defined in the Canadian Electrical Code, Part I. The principles may also be applied to other similar types of equipment. 1.2 This Standard also covers portable battery-powered equipment. 1.3…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1987-03-30
Code(s) de l'ICS :
29.260.20
Motor Operated Food Processing Appliances
1.1 This Standard applies to motor operated food processing appliances* intended for use on nominal system voltages of 600 V and less, except that where appliances are driven by universal type motors or electromagnetic mechanisms, the Scope is limited to appliances rated for use on nominal system voltages of 240 V or less. This Standard applies to appliances designed to be used in accordance…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1987-03-30
Code(s) de l'ICS :
67.260; 97.040.50
Standard method of measurement of lamp cap temperature rise
Describes the standard method of measurement of lamp cap temperature rise which is to be used when testing tungsten filament or discharge lamps for compliance with the limits. Covers the method of test and the specifications for test lampholders for lamps fitted with various sizes of ES and BC caps. This method has been used widely for incandescent lamps but its application is not limited to that…
Éditeur :
IEC
Statut :
Révisé
Date de publication :
1987-03-29
Code(s) de l'ICS :
29.140.10
Radio-frequency connectors. Part 1: General requirements and measuring methods
Serves as a generic specification providing the basis for the sectional standards which apply to individual connector types. Establishes uniform concepts and procedures concerning : -terminology; -standard ratings and characteristics; -testing and measuring procedures concerning electrical electrical and mechanical properties; -classification of connectors with regard to environmental testing…
Éditeur :
IEC
Statut :
Publié
Date de publication :
1987-03-29
Code(s) de l'ICS :
33.120.30
Standard for Smoke Detectors for Fire Alarm Systems
1. SCOPE 1.1 This Standard sets forth requirements for ionization-type and photoelectric-type detectors, rated at 300 V or less, to be employed in ordinary indoor locations in accordance with the following: A Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524M; B Standards of the National Fire Protection Association: No. 71,…
Éditeur :
ULC
Statut :
Annulée
Date de publication :
1987-02-28
Code(s) de l'ICS :
13.220.20; 13.320
Standard for Smoke-Alarms
1. SCOPE 1.1 This Standard sets forth requirements for smoke-alarms, single- and multiple-station type, rated 120 V or less, intended for open area protection in ordinary indoor locations. 1.2 A smoke-alarm, as defined by these requirements, is a self-contained unit which consists of an assembly of electrical components including a smoke chamber, alarm-sounding appliance, and…
Éditeur :
ULC
Statut :
Annulée
Date de publication :
1987-02-28
Code(s) de l'ICS :
13.220.20; 13.320
Burned Clay Brick (Solid Masonry Units made from Clay or Shale)
1. Scope 1.1 This Standard covers burned clay brick intended for use in masonry or in structural facing components of structures, or both. 1.2 The brick are prismatic units available in a variety of sizes, textures, colours, and shapes. This Standard is not intended to provide requirements for paving brick specified in ASTM Standard C902. 1.3 Brick are manufactured from clay,…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1987-02-28
Code(s) de l'ICS :
91.100.15; 91.100.25
Safety Code for Personnel Hoists
1. Scope 1.1 This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works, and that are used during construction, alteration, or demolition to raise and lower persons and/or materials connected with or related to a building project. 1.2 This Standard covers the design, construction, installation, operation, and acceptance…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1987-01-31
Code(s) de l'ICS :
53.020.99
Fuseholder Assemblies
1. Scope 1.1 This Standard applies to fuseholder assemblies, rejectors for Type C fuses, adapters for Type S fuses, and the current-carrying parts pertaining thereto and mounted on bases of suitable insulating material, designed to be employed in accordance with the Canadian Electrical Code, Part I. 1.2 Fuseholder assemblies covered by this Standard are intended to accept only the following…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1986-12-31
Code(s) de l'ICS :
29.120.99

Spacer