Specifies the characteristics of products without (type A) and with split pin holes (type B) with metric dimensions and nominal diameters from 3 mm up to and including 100 mm with reference to International Standards; gives examples for the designation.
Specifies the characteristics of products without (type A) and with split pin hole (type B) with metric dimensions and nominal diameters from 3 mm up to and including 100 mm; includes specifications with reference to International Standards; gives examples for the designation.
Aircraft — Magnetic indicators — Part 1: Characteristics
Specifies the general operating characteristics and standardization principles. Lays down the basic requirements relating to the mechanical and electrical characteristics as well as the basic environmental conditions in service. ISO 5065-2 gives details of the tests referred to in this part of ISO 5065. Includes design requirements, type approval testing and production and quality testing.
Electrically Heated Hobby and Educational Type Kilns
1. Scope
1.1
This Standard applies to cord-connected and permanently connected electrically
heated pottery kilns for use on nominal system voltages of 600 V or less,
designed to be used in accordance with the Rules of the Canadian Electrical
Code, Part I.
1.2
This Standard does not apply to electrical equipment employing high-frequency
currents or industrial heating equipment.
Rubber — Determination of adhesion to rigid materials using conical shaped parts
Adhesion is obtained by a bonding system which may include not only the rigid material and the rubber compound, but other elements, e.g. thin alloy coatings etc. The bonding system should be adequately specified by the user, but the standard provides for evaluation of differnt types of failure related to a complex adhesion system. The standard test piece is given in a figure, the test report is…
Wrenches, Box, Open End, and Combination (Inch Series)
1.1
This standard is intended to cover the complete general and dimensional
data for nickel-plated nonadjustable wrenches used for tightening and loosening
(Inch Series) bolts and nuts.
1.2
This standard does not include all types and sizes of the commodity indicated
by the titles of this standard, nor all those commercially available, but
includes only those generally used by the Federal…
Textile glass — Rovings — Basis for a specification
Is intended to serve as a guide for the establishment of technical specifications for products of given type. Rovings are divided in two main groups: - rovings that are chopped during subsequent operations - rovings that are utilized without being chopped The following particulars are mentioned and the relevant International Standards are quoted: Designation, type of glass, filament diameter,…
1. Scope
1.1 This Standard applies to manually operated and mechanically operated special use switches that are:
(a) for use on dc, ac/dc or ac only; and
(b) rated for not more than
(i) 60A at 250V or less; or
(ii) 30A or 2hp at 600V or less.
1.2 This Standard does not apply to
(a) switches forming parts either of electrothermal appliances or automatic temperature-responsive switches;
(b)…
Rubber-covered rollers — Determination of apparent hardness — Part 2: Shore-type durometer method
Describes the measurements of the appropriate hardness where only medium precision is required. The method and apparatus used are essentially those described in ISO 7619, the measurements in this case being made on the curved surface. Shore-type A and D instruments are specified, the latter being used for measurements on rollers of high hardness. Part 1 and 3 of this standard deal with the IRHD…
