Rechercher

This standard applies to four types of hemp cordage.

Gives methods of measurement for television broadcast receivers under conditions in which the signal presented to the receiver is not in accordance with the specifications for broadcast signals adopted by the CCIR. Such nonstandard signals may be produced by video tape recorders, video disc players and television games, among other sources. Specifies methods of measurement for those…

Specification of a method for determining an apparent viscosity of resins in a liquid state, using one of the types of rotational viskosimeter described in this standard. A spindle or disc is driven at constant rotational frequency in the product being studied. The resistance exerted by the fluid on the spindle, which depends on the viscosity of the product, cause a torque, which is indicated by…

1. Scope 1.1 This Standard covers the performance, construction, testing, marking, installation, operation, and servicing of complete commercial/industrial pressure washers and steam cleaners that are either gas-fired or oil-fired. 1.2 The Standard applies to (a) complete machines comprising a continuous coil-type heating system, with no space for steam accumulation, in which the…

1. Scope 1.1 This Standard covers welding requirements for any type of welded steel construction with the exception of those types listed in Clause 1.2. Requirements that are essentially common to all such structures are covered in Clauses 1 to 10, while provisions applying specifically to statically loaded structures and to dynamically loaded structures are included in Clauses 11 and…

1. Scope 1.1 This Standard covers welding requirements for any type of welded steel construction with the exception of those types listed in Clause 1.2. Requirements that are essentially common to all such structures are covered in Clauses 1 to 10, while provisions applying specifically to statically loaded structures and to dynamically loaded structures are included in Clauses 11 and…

Specifies the technical requirements for the design and construction of compressors; it also details the documetation requirements. Annex A, which contains instructions subject agreements in the contract, is given for information only. Annex B, which contains the data sheets, forms an integral part of this Standard.

Specifies details for types of threads and thread sizes. Tabulates nominal diameters from 9,73 mm up to and including 30 mm together with the corresponding pitches and designations, refers to the national standards of concern (table 1). Table 2 contains valve outlets for toxic gases; valve outlets for flammable gases are given in table 3. Table 4 gives valve outlets for oxidizing gases, and table…

Deals with the definitions, the conditions and the methods of measurement used to ascertain the performance of receivers having audio-frequency bandwidths generally not exceeding 10 kHz for the reception of voice and other types of signals, using angle modulation (phase/frequency modulation), or double-sideband amplitude modulation with full carrier. This standard is intended to be used in…

This National Standard of Canada is equivalent to International Standard ISo 4335-1987. 1 Scope and field of application This International Standard specifies elements of data link control procedures for synchronous, code-transparent data transmission using the HDLC frame structure specified in ISO 3309 and independent frame numbering in both directions. These HDLC elements of…