Rechercher

1. Scope 1.1 This standard applies to latex type primer-sealer for use on interior wall surfaces including plasterboard, dry plaster, concrete or previously painted porous surfaces. 1.2 For more detailed information on intended uses see par. 7.2. 1.3 This standard may require the use of materials and/or equipment that could be hazardous. This…

Applicable to all types of resistive potentiometers, including lead-screw actuated types, presets, multi-turn units, etc. to be used in electronic equipment. Establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications for Qualification Approval and Quality Assessment Systems for electronic components. Has been mainly written, and the test…

This TTD covers the essential elements of future international standardization of UMF types.

1. Scope and Objective 1.1 This Standard applies to wet-process porcelain and toughened glass suspension-type insulators used on ac overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. This Standard applies to single insulator units only. This Standard does not apply to long rod insulators. 1.2 The objective of this Standard is…

1. Scope 1.1 This Standard applies to Christmas tree and other decorative lighting outfits, intended for connection to circuits of 125 V or less between conductors by means of an attachment plug cap, and designed to be used in accordance with the rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to indoor or outdoor outfits for illuminating Christmas trees and…

1.1 This standard applies to two types of vapour barrier jacket and facing material comprised of aluminum foil, glass fibre scrim and paper laminated with adhesive, for use in the temperature range of -20 to 65 degrees C over thermal insulation for pipes, ducts and equipment. 1.2 For more detailed information on intended uses, see par. 8.2.

1. Scope 1.1 This Standard applies to portable hand-held electrically heated tools for voltages of 250 V and less, designed to be used in ordinary (ie, nonhazardous) locations in domestic, commercial, or industrial applications in accordance with the Rules of the Canadian Electrical Code, Part I. For convenience the shorter term tools is used herein, except as otherwise stated. 1.2 This…

1. Scope 1.1 This standard applies to a flat latex finish for all types of interior walls either new or previously painted. 1.2 For more detailed information on intended uses see par. 7.2. 1.3 This standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects…

Note: In order to maintain a consistent relationship between Clause numbers and subject matter throughout this Standard, some numbers may have been omitted. 1. Scope 1.1 This Standard applies to panelboards and enclosed panelboards, rated 600 V and less, for use in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I, to provide overcurrent…

1. PURPOSE AND SCOPE 1.1 This standard describes a physical method of quantitative analysis. The method may be used to analyze mixtures of fibres that differ in density by at least 0.15 g/mL. The method may also be used when chemical methods of analysis are not suitable. The solvents used must not change the density of fibres. 1.2 The accuracy of the method depends upon sufficient difference…