Rechercher

1.1 General This Standard specifies minimum requirements for stile and rail wood doors. The Standard provides definitions, tolerances, sizes, construction, types of doors, detailed requirements, grading, and testing methods. Note: This extract from CSA Standard O132.2-M1977 does not include requirements for flush doors (solid or hollow core) or moulded skin doors. 1.2 Classification…

1. Scope 1.1 This Standard applies to motor-operated vacuum cleaners and blower cleaners, and to household use floor finishing machines to be employed in accordance with the Rules of the Canadian Electrical Code, C22.1, Part I and the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements cover (1) household, commercial, and coin-operated vacuum cleaning machines and blower…

This National Standard of Canada is equivalent to International Standard ISo 9004-2:1991. This Part of ISO 9004 gives guidance for establishing and implementing a quality system within an organization. It is based on the generic principles of internal quality management described in ISO 9004:1987 and provides a comprehensive overview of a quality system specifically for services. This…

1.1 This Standard specifies the construction and testing of portable power cables normally used in applications where the cables are subject to frequent flexing, and installation is in accordance with CSA Standards CAN3-M421, Use of Electricity in Mines, and/or C22.1, Canadian Electrical Code, Part I. 1.2 The cable constructions specified in this Standard are suitable for use at a…

This National Standard of Canada is equivalent to International Standard ISO 6816:1984. It establishes the classification of the major types of winches and rope anchors and the nomenclature for major components and parts peculiar to these machines. Examples used here are not intended to include all existing commercial machines nor to be descriptive of any particular machine.

1.1 This Standard covers structural quality steel plates, shapes, hollow sections, sheet piling, and bars for general construction and engineering purposes. 1.2 A number of strength levels are available under this Standard and are designated by the minimum yield strength in megapascals. The grades, types, and strength levels normally available are shown in Table 1. Charpy V-Notch…

1.1 Covers the design, fabrication, installation, inspection, testing, and safety aspects of the operation and maintenance of gas pipeline systems including gathering lines, transmission lines, compressor stations, metering and regulating stations, distribution lines, and service lines. 1 .2 The Scope of this Standard, as shown in Figure 1.1, includes the following: (a) gas storage…

1.1 Cette norme spécifie les méthodes servant à la détermination de la capacité et de la consommation d'énergie des machines à laver électrodomestiques. 1.2 La norme décrit les méthodes de détermination de la consommation d'énergie et fixe les limites de cette consommation pour les machines à laver à chargement vertical de modèles standard ou compact. 1.3 La norme vise les…

1.1 This Standard is intended to describe the minimum requirements for (a) the application and finishing of gypsum board used in wall and ceiling construction (except gypsum board to receive plaster); and (b) the installation of framing to receive the above gypsum board. 1.2 Where a fire resistance rating is required, the installation, including type and spacings of fasteners, shall be…

Sets out general requirements and gives guidelines for selecting and implementing risk analysis techniques, primarily for technological hazards. Risk analysis is a structured process that attempts to identify both the extent and likelihood of consequences associated with such hazards. Risk analysis answers three fundamental questions: (1) What can go wrong? (2) How likely is it? and (3…