Rechercher

1.1 This standard applies to one type of distillate fuel which is suitable for use in medium speed diesel engines of the type generally used in railroad locomotives. 1.2 This type of fuel may be suitable for use in other medium speed diesel engine applications.

1.1 This Standard provides guidance for the safe use of medically applied laser systems, hereinafter referred to as medical lasers, for diagnostic, therapeutic, and medical research purposes in health care facilities. It is intended for use by all persons associated with the administration, installation, operation, maintenance, and service of medical lasers. 1.2 This Standard presents…

1.1 This standard applies to three types of thermal insulating blocks and one type of thermal insulating blanket for elevated temperature. 1.2 These insulating products are intended for use between the hot surfaces of insulating fire bricks and the casings of boilers, where the temperature of the hot surface is less than 1090 degrees Celsius.

This standard applies to two types and five classes of faced and unfaced inorganic fibrous thermal insulation blankets for application on surfaces with temperatures for a maximum up to 650 degrees C. Products to this standard may include a surface covering that forms an integral part of the insulation.

IEC 60317-39:1992 specifies the requirements of glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper winding wire, temperature index 180. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock…

Specifies the performance standards and type testing of marine radar transponders used in search and rescue operations at sea (SART), as required by the relevant regulations of the international SOLAS convention. Is associated with IEC 60936 and IEC 60945.

The two methods described are applicable to all known types of thermoplastics and cross-linked thermoplastics pipes at any temperature and to any practicable test medium. They were developed on the basis of test data from pipes of relatively small sizes. The pipe sizes to be tested are specified in the relevant product standard.

Describes the classes 0 to 3 of the OSI transport protocol, defined in ISO 8073 using the formal description technique LOTOS, which is defined in ISO 8807. Transport protocol class 4 and NMCS are not covered. In view of complexity and widespread use of OSI standards it is imperative to have precise and unambiguous definitions of these standards. Formal Description Techniques form an effective…

Describes the classes 0 to 3 of the OSI transport protocol, defined in ISO 8073 using the formal description technique LOTOS, which is defined in ISO 8807. Transport protocol class 4 and NMCS are not covered. In view of complexity and widespread use of OSI standards it is imperative to have precise and unambiguous definitions of these standards. Formal Description Techniques form an effective…

IEC 60317-40:1992 specifies the requirements of glass-fibre braided, silicone varnish treated, bare or enamelled rectangular copper winding wire, temperature index 200. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot…