Rechercher

1.1 This standard applies to two types of distillate fuels. Type A and Type b which are suitable for high speed diesel engines, e.g. those that generally operate at speeds in excess of 1200 r/min. 1.2 Type A is intended for use in engines such as urban transit buses and passenger automobiles or when ambient temperatures require better low temperature properties than Type B. Type B is…

1.1 Applies to an inhibited phosphoric/oxalic acid type rust-stain remover that, when diluted with water, will remove rust stains from painted ferrous surfaces in the presence of small amounts of grease and oil. 1.2 Inhibited rust-stain remover covered by this standard is for use on painted ferrous surfaces or other painted metal surfaces stained by rust, e.g. ships and other marine…

1.1 This standard establishes the general and detailed requirements for graduations and markings on metric linear measuring instruments used primarily in construction and surveying. 1.2 The following types of linear measuring instruments are covered by this standard: Folding rule, range pole, level rod, water level staff gauge plate.

Applies to two types of vinyl-coated fabric differentiated on the basis of mass per unit area, intended for use as upholstery for public seating. The standard contains physical properties, performance requirements and related test methods.

Describes the Logical Level 3 (generic level) Interface for tape drives, the physical, electrical and configuration characteristics and the transmission protocol of which are in accordance with ISO/IEC 9318-1. Is to facilitate the development and utilization of an intelligent interface which permits the interconnection of multiple peripheral types of peripherals (disk, printers, tapes,…

ISO 4628 is a series of standards dealing with the sampling and testing of paints, varnishes and related products. This part provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products…

This part shows and identifies visual imperfections on typical rotary shaft lip type seals, dimensionally standardized in ISO 6194-1, as a convenience for purchasers and manufacturers in their discussions about the importance of imperfections in different applications. It defines and classifies typical surface imperfections that often impair the function of the rotary shaft lip type seal.

Specifies methods for determining the metabolic rate, but can also be used for other applications, e.g. for the assessment of working practices, the cost of specific jobs or sport activities, the total cost of activity, etc. Annexes A to G contain: classification of metabolic rate for kinds of activities, classification of metabolic rate by occupation, data for standard person, metabolic rate for…

Describes the Logical Level 3 (generic level) Interface for magnetic and optical disk drives, the physical, electrical and configuration characteristics of which are in accordance with ISO/IEC 9318-1. Is to facilitate the development and utilization of an intelligent interface which permits the interconnection of multiple peripheral types such as disk, tape, communications, to a controller.…