Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
This National Standard of Canada is based on International Standard IEC 1010-2-031:1993.
1. Scope and Object This clause of part 1 is applicable except as follows:
1.1 Scope Replacement:
This Particular Standard specifies requirements for the safety of hand-held and hand-manipulated probe assemblies designed to be used with equipment installed and used in accordance with the Rules…
Countersunk raised head screws (common head style) with type H or type Z cross recess — Product grad...
Specifies the characteristics of countersunk raised head screws of product grade A, with threads from M1,6 to M10 inclusive and with type H or type Z cross recess. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.
Pan head screws with type H or type Z cross recess — Product grade A
Specifies the characteristics of pan head screws of product grade A, with threads from M1,6 to M10 inclusive and with type H or type Z cross recess. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.
Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade ...
Specifies the characteristics of countersunk flat head screws of product grade A and property class 4.8, with threads from M1,6 to M10 inclusive and with type H or type Z cross recess. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1 and ISO 965-2.
1.1 General
This Standard covers performance requirements for personal hearing protection
devices.
Note: A guide for the selection, fit, care, and use of hearing protectors as
required for an effective hearing conservation program is presented in Appendix
A.
1.2 Types
The following types of hearing protectors are covered in this Standard:
earplugs, earmuffs, and communication…
This National Standard of Canada is equivalent to International Standard ISO 9919:1992.
1.1 Scope
ISO 9919 is one of a series of International Standards based on IEC 601-1; in IEC 601-1 (the General Standard), this type of International Standard is referred to as a Particular Standard. As stated in 1.3 of IEC 601-1:1988, the requirements of this International Standard take precedence…
Procedures for the Measurement of Occupational Noise Exposure
Scope
1.1
This Standard describes procedures for the determination of the occupational
noise exposure level (L ex,T) using sampling techniques. L ex,T represents the
long-term noise exposure of employees. It is calculated from measurements of
the equivalent sound level (L eq,t) in the workplace.
The procedures in this Standard normally form part of any occupational hearing…
This National Standard of Canada is equivalent to International Standard ISO
5361-1:1988.
1 Scope and field of application
This part of ISO 5361 specifies general requirements for tracheal
(endotracheal) tubes.
This National Standard of Canada is equivalent to International Standard ISo
5361-2:1993.
1 Scope
This part of ISO 5361 specifies requirements for orotracheal and naso-…
This National Standard of Canada is equivalent to International Standard ISO 9918:1993.
1.1 Scope
ISO 9918 is one of a series of International Standards based on IEC 601-1; in
IEC 601-1 (the "General Standard"), this type of International Standard is
referred to as a "Particular Standard". As stated in 1.3 of IEC 601-1:1988,
the requirements of this International…