Rechercher

1. Scope 1.1 This Standard applies to motor-operated appliances intended for use on nominal system voltages of 600 V and less, except that where appliances are driven by universal-type motors or electromagnetic mechanisms the scope is limited to appliances rated for use on nominal system voltages of 240 V or less. It applies to appliances designed to be used in accordance with the Rules…

This standard applies to two types and four classes of faced and unfaced inorganic fibrous thermal insulation boards for application on surfaces with a temperature up to 650 degrees C. Insulation boards may include a surface covering that forms an integral part of the insulation.

Intended for type tests and acceptance and factory tests. The performance characteristics measured in accordance with this standard make it possible to compare the results of measurements made by different observers.

1. SCOPE 1.1 These requirements cover galvanic protection systems for cylindrical horizontal steel tanks of the non-pressure type which are: A Manufactured in accordance with the applicable requirements of CAN/ULC-S603, Standard for Steel Underground Tanks for Flammable and Combustible Liquids, ; and B Used for the underground storage of flammable…

1. Scope 1.1 This Standard pertains to wood-based panel products, designed and manufactured for protected construction uses as roof sheathing, wall sheathing, and floor sheathing in light frame construction applications. Construction Sheathing panels primarily comprise three types: all wood veneer; part veneer and part wood furnish; and all wood furnish. 1.2 This Standard requires…

Relates to connectors for r.f. transmission lines and serves as a generic specification providing the basis for the sectional standards which apply to individual connector types. Establishes uniform concepts and procedures concerning: -terminology; -standard ratings and characteristics; -testing and measuring procedures concerning electrical and mechanical properties; -classification of…

Relates to connectors for r.f. transmission lines and serves as a generic specification providing the basis for the sectional standards which apply to individual connector types. Establishes uniform concepts and procedures concerning: -terminology; -standard ratings and characteristics; -testing and measuring procedures concerning electrical and mechanical properties; -classification of…

Defines the "ISO Central Secretariat SGML application", i.e. elements required, generic identifiers, attributes, and their structure, for International Standards and Technical Reports. Annex A contains the formal SGML Document Type Definition (DTD). The specifications refer to working drafts, committee drafts, draft International Standards, International Standards, Technical Reports,…

Defines the "ISO Central Secretariat SGML application", i.e. elements required, generic identifiers, attributes, and their structure, for International Standards and Technical Reports. Annex A contains the formal SGML Document Type Definition (DTD). The specifications refer to working drafts, committee drafts, draft International Standards, International Standards, Technical Reports,…

Is applicable to end systems concerned with operating in the Open Systems Interconnection environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode Network Service. Is applicable to the provision of the connection-mode Transport Service in end systems attached to any type of subnetwork from which the…