1.1
This standard applies to a low sheen latex interior finish for all types of
interior walls, either new or previously painted.
1.2
Paint complying with this standard is intended for application on walls and
ceilings. This paint is suitable for application over practically any type of
wall surface, including wallboard, gypsum board, dry plaster, cement, brick or
concrete block. For…
1.1
This standard applies to two types of low sulfur distillate fuel, Type A-LS and
Type B-LS required by high speed diesel engines (generally operating above 1200
r/min) that require low sulfur diesel fuel to meet emission control regulations.
1.1.1
Type A-LS is intended for use in engines such as urban transit buses and
passenger automobiles or when ambient temperatures require better…
Standard for Tank Assemblies for Collection of Used Oil
1.1
These requirements cover the adaptation of tank assemblies contructed in
accordance with the Standards described in Clause 1.2 for the collection and
storage of used oil.
1.2
The tanks shall be of the non-pressure type and constructed in accordance with
the basic requirements of one of the following Standards:
A. ULC-S601 - Standard for Shop Fabricated Steel Abovegound Horizontal…
1.1
These requirements cover humidifiers rated 600 V or less, and intended to be
used in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, and
the Rules of the Canadian Electrical Code (CEC), Part 1.
1.2
These requirements cover humidifiers intended for residential and commercial
use. This includes humidifiers of the centrifugal atomizing type,
evaporative-media type,…
1.1
These requirements cover clear or translucent glazing material intended for
indoor use, outdoor use, or indoor/outdoor use as a substitute for, or in
combination with plate glass show window panels.
1.2
The material is intended to resist burglarious attacks of the hit-and-run type.
1.1
This standard applies to durable bond papers for use in printing, typewriting
and pen and ink writing. A standard for permanence of paper is in the course
of preparation.
1.2
For more detailed information on intended uses, see par. 8.2.
1.1
This standard applies to durable general purpose and machine-posting ledger
paper for use in printing, typewriting, and pen and ink writing. A standard
for permanence of paper is in the course of preparation.
1.2
For more detailed information on intended uses, see par. 8.2.
1.1
This standard applies to the dimensions of industrial type coveralls for wear
by men.
1.2
Three height categories are covered, embracing a total height range from 160 to
191 cm.
Colour Code, for Size Identification of Clothing and Linen
1.1
This standard designates a series of six basic colours for size identification
of various types of hospital and institutional clothing and linen.
1.2
Method of application of coloured size identifying materials is not covered in
this standard (par. 5.1).
This standard applies to industrial type coveralls made from a 65%
polyester/35% cotton twill fabric, approximately 225 g/m². They shall not be
worn in an environment requiring lint-free clothing.
