1. SCOPe
1.1 This Standard applies to 25 and 38 mm synthetic percolating type hoses
having a minimum service test pressure of 2070 kPa suitable for use in fighting
forest fires. These hoses are classified as follows:
Class A - woven-jacketed synthetic fibre with an integral lining; and
Class B - rubber-covered jacket and rubber-lined.
1.2 The hose shall be lined and…
Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard m...
Applies to laboratory standard microphones meeting the requirements of IEC 61094-1. The principles of the method are applicable to other types of microphones. In particular, microphones which fulfil the requirements of IEC 61094-1, when fitted with a special adaptor, may also be calibrated according to this standard when the adaptor is removed.
Specifies a primary method of determining the free-…
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Perform...
Specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium and metal halide lamps. Each section details specific requirements for a particular type of ballast. Covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz associated with discharge lamps, having rated wattage,…
1. Scope
1.1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated, silicone-polymer-coated, or vinyl- polymer-coated electrical sleeving that consists of closely woven fabric made from glass and intended for use in equipment designed to be installed and used in accordance with the rules of th e Canadian Electrical Code, Part I (CEC), or the ANSI/NFPA 70 National…
Standard data element types with associated classification scheme for electric components - Part 3: ...
Specifies the procedures to be followed by the validation agency
and the maintenance agency of the IEC reference collection of
standard technical element type definitions, with associated
classification schemes and term definitions in compliance with IEC
1360-1.
This publication has the status of a Technical Report type 3
Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a...
Is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. This part applies only to resistive voltage detectors used in contact with the part to be tested, as a single unit or as a separate device completed by an adaptable insulating pole covered in IEC 60855 or IEC…
1. Scope
1.1 This Standard applies to medium-screwbase incandescent lamps having right-hand threads that are intended for general lighting use in luminaires and other lighting equipment designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2 This Standard includes requirements for
(a) general construction details;
(b) wattage;
(c) torsion…
Rollover Protective Structures (ROPS) for Agricultural, Construction,
Earthmoving, Forestry, Industr...
1. Scope
1.1
This Standard is a companion to the other Standards of the B352 series and can
only be used in conjunction with each of the Standards.
1.2
This series of Standards details the design, testing, performance, and safety
requirements for rollover protective structures (ROPS) for certain types of
self-propelled machines for agricultural, construction, earthmoving, forestry,
industrial,…
1. Scope
1.1
This Standard covers safety belts of the tongue buckle type and lanyards. It
may be applied to an assembly consisting of a belt with an attached lanyard, or
to a belt alone, or to a lanyard alone.
1.2
This Standard does not cover specific designs for safety belts, except insofar
as design limitations are necessary to provide an acceptable level of service.