1. SCOPe
1.1 These requirements apply to the construction and performance of back-pack
fire extinguishers for use in fighting forest, brush, and grass fires.
Back-pack extinguishers shall be classified under the following types:
Type 1 - Rigid Metal Tank
Type 2 - Rigid Plastic Tank
Type 3 - Soft Tank
1.2 Back-pack fire extinguishers…
1. SCOPE
1.1 This standard states the requirements for a water-based silicone liquid
polish and cleaner for use on varnished or lacquered wood, and painted
metal.
1.2 This polish is used to clean and restore the finish on painted,
varnished or lacquered wood and metal surfaces. For best results, the
minimum amount of polish is to be applied on the…
This National Standard of Canada is equivalent to International Standard ISO 10005:1995.
1 Scope
1.1 This International Standards provides guidelines to assist suppliers in
the preparation, review, acceptance and revision of quality plans.
It is intended for use in two situations:
a) as guidance to a supplier organization in meeting the requirements of
ISO 9001, ISO…
Information technology — International Standardized Profiles FVT3nn — Virtual Terminal Basic Class —...
Contains the definition of a font assignment type that enables a font assignment value to be specified as a font resource property-list in accordance with ISO/IEC 9541-1.
Cylinders, Spheres, and Tubes for the Transportation of Dangerous Goods
1. Scope
1.1 General
This Standard covers requirements for the manufacturing, inspection, testing, marking, requalification, reheat treatment, repair, and rebuilding of cylinders, spheres, and tubes (containers) for the transportation of dangerous
goods. In addition, it includes the requirements for the qualification of new designs and registration requirements.
1.2 Designations and…
1.1 SCOPE
1.1.1 Types of Regulators. This standard applies to individual gas appliance
pressure regulators, which are not a part of a combination control (see
Part V, Definitions), hereinafter referred to as regulators, intended
for application on individual gas appliances.
This standard also applies to negative gas appliance pressure…
1. Scope
1.1
This Standard applies to Types USEI 75, USEI 90, and USEB 90 service-entrance
cables intended for underground installations on systems
(a) having a nominal voltage rating of 600 V and less; and
(b) installed in accordance with the Rules of the Canadian Electrical Code,
Part 1.
1.2
The products covered in this standard have a maximum allowable conductor
temperature of 75…
1.1 SCOPE
1.1.1 This standard applies to newly produced gas food service equipment
providing coverage for ranges and unit broilers, baking and roasting ovens,
counter appliances, deep fat fryers and kettles, steam cookers and steam
generators (see Part IV, Definitions) hereinafter referred to as appliances,
constructed entirely of new, unused parts and materials for use in food service
centers…
Safety of household and similar electrical appliances - Part 2: Particular requirements for motor-co...
Deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions which may be expected to occur in normal use, their rated voltage being not more than 250 V for…
1. Scope
1.1
This Standard applies to polyamide pipe, tubing, and fittings for use in gas
mains and services. This includes gathering, transmission, and distribution
applications that carry fuel gases, which may contain aromatic hydrocarbons.
1.2
This Standard also applies to all types of fittings and connections used in a
plastic gas pipe system, including plastic-to-metal transition…
