Rechercher

1. Scope 1.1 These requirements cover air filter units of both washable and throw-away types for removal of dust and other airborne particles from air circulated mechanically in equipment and systems. 1.2 Air filter units conforming to the preceding are classified as follows: CLASS 1 UNITS - Those which, when clean, do not burn with a flame or produce…

1. Scope 1.1 This Standard applies to thermal insulation suitable for indoor use in building construction within the temperature range of -50 to 80°C. 1.2 The types of insulation materials which lend themselves to the evaluation using the method described in this Standard are: A Loose fill, designed for pouring application; B Loose fill, designed for blowing…

Contains the definition of control object types that are used for the transfer of TELNET signals and negotiation of TELNET options.

Contains the definition of a control object type that may be used to set a time limit associated with data entry into the display object during S-mode operation of a VT-association. The significance of this time limit does not form part of this definition.

1 Scope 1.1 General The concept of Profiles for OSI, and the structure of the International Standardized Profiles that document them, are defined in ISO/IEC TR 10000-1. Such Profiles are divided into a number of different classes and sub-classes. Two of these classes contain sub-classes comprising functions of the Virtual Terminal Basic Class Service and Protocol specified in the base…

Applicable to end systems and relay systems operating over FDDI LAN subnetworks in the Open Systems Interconnection (OSI) environment. Specifies the subnetwork-type dependent requirements for the MAC, PHY and PMD sublayers, and the Station Management function when the end system or relay system is attached to an FDDI LAN subnetwork.

Applicable to interworking units concerned with operating in the Open Systems Interconnection (OSI) Local Area Network environment. Specifies a combination of OSI standards that collectively provide a MAC relay function. Specifies requirements that are dependent on the type of subnetwork. Applicable to an interworking unit which is attached to a Token Ring LAN subnetwork and is relaying to…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10611-1:1994. 1 Scope 1.1 General This part of ISO/IEC ISP 10611 contains the overall specifications of the support…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10611-2:1994. 1. Scope 1.1 General This part of ISO/IEC ISP 10611 specifies how the Remote Operations Service Element…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10611-3:1994. 1 Scope 1.1 General This part of ISO/IEC ISP 10611 (AMH11) covers message transfer between message…