Rechercher

1 Scope 1.1 General The concept of Profiles for OSI, and the structure of the International Standardized Profiles that document them, are defined in ISO/IEC TR 10000-1. Such Profiles are divided into a number of different classes and sub-classes. Two of these classes contain sub-classes comprising functions of the Virtual Terminal Basic Class Service and Protocol specified in the base…

1. Purpose and Scope 1.1 This method describes a procedure for conditioning most types of geosynthetics to a temperature and to a moisture equilibrium with a standard atmosphere. This method is not recommended for geosynthetic clay liners. 1.2 The standard atmosphere is defined as air maintained at a temperature of 23 ± 2°C and a relative humidity of 60…

1 SCOPE and LIMITATIONs 1.1 Scope This Recommended Practice covers testing methods for characterizing the performance of cleanrooms. It is intended to assist planners, designers, manufacturers, and buyers in preparing detailed specifications for cleanroom procurement and for assuring cleanroom operational compliance. Performance tests are recommended for three types of cleanrooms at…

1.1 SCOPE 1.1.1 This standard applies to newly produced Type 1 clothes dryers (see Part IV, Definitions), hereinafter referred to as dryers, constructed entirely of new, unused parts and materials: a. For use with natural gas, b. For use with manufactured gas, c. For use with mixed gas, d. For use with liquefied petroleum gases…

1. Scope 1.1 This Standard gives definitions, classifications, and a method for determining specific energy consumption for self-contained and remotely located refrigerated display cabinets. 1.2 This Standard applies to commercial refrigerated display cabinets that are intended for displaying and merchandising (a) food products and other perishable merchandise (eg, cut flowers) in…

1. Scope 1.1 This Standard describes requirements and test methods for materials, dimensions, quality of work, pipe stiffness, quality control, joining systems, and marking for SDR 28, 35, and 41 Type PSM PVC sewer pipe and fittings. Note: Industrial waste disposal lines should be installed only with specific approval of the regulatory authority, since chemicals not commonly found in…

Classifies and defines the terms to be used in describing the different types of adaptive controller. The classifications described are logically a complete series, although it is quite possible that no controller will be available in some of the categories described. However, many controllers will be classified under more than one category described in this standard.

1. Scope 1.1 This Standards specifies the requirements for distribution (power), control, and signal cables for use aboard commercial ships and mobile offshore drilling units (MODU's), rated 8000 V maximum, in single or mulitconductor construction, with or without metal armour, and with or without an overall jacket. 1.2 This Standard may not cover all types, sizes, and voltage ratings of…

Contains the type definitions of a control object that may be used to map regions of the display object exclusively on a display surface such as a screen and a printing device and to control the operations of the printer.

Provides basic mating and performance information for subminiature coaxial connectors with overlapping polytetrafluoroethylene (PTFE) dielectric interface for use with flexible and semi-rigid r.f. cables. The connectors are usable up to a frequency of 3 GHz. Only the interface dimensions are standardized. Other technical data are supplied for guidance only.