Information technology — International Standardized Profiles TB, TC, TD and TE — Connection-mode Tra...
Specifies the requirements for Network Layer for call control procedures concerning the outgoing call of a packet mode ISDN in case B using virtual calls.
Information technology — International Standardized Profiles TB, TC, TD and TE — Connection-mode Tra...
Specifies the requirements for Network Layer for call control procedures concerning the incoming call of a packet mode ISDN in case B using virtual calls.
Information technology — International Standardized Profile RA — Relaying the Connectionless-mode Ne...
Specifies media-dependent requirements applicable to an interworking unit attached to an ISO/IEC 8802-5 Token Ring LAN subnetwork. The operation of an interworking unit may involve relaying from one subnetwork to another, and those subnetworks need not be of the same type. Applies only to communication over those subnetworks which are Token Ring LANs.
Information technology — International Standardized Profiles AFTnn — File Transfer, Access and Manag...
Contains the basic definitions of document types, constraint sets, abstract syntaxes, and transfer syntaxes as used and referenced in the FTAM application ISO/IEC ISP 10607-3 (AFT11), ISO/IEC ISP 10607-4 (AFT12), ISO/IEC ISP 10607-5 (AFT22) und ISO/IEC ISP 10607 6 (AFT3). Replaces the first edition, which has been technically revised. It also incorporates amendment 1:1991 and amendment 2:1994.
Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for...
Provides brief summaries of the basic International Standards for determining emission sound pressure levels from all types of machinery at work station and at other specified locations and gives guidance on the process of selection. The guidance given does apply only to airborne sound.
Performance and Compatability Requirements for Telephone Sets with Loop Signalling
1. Scope
1.1 Purpose
This Standard provides performance and compatibility requirements for telephone
sets intended for direct tip and ring connection to central office (CO) or
private branch exchange (PBX) lines. The requirements are based on present
telecommunications plant characteristics at the telephone set interface. These
requirements should ensure satisfactory voice-grade…
Standard for Synthetic Non-Percolating Forestry Hose
1. SCOPE
1.1 This Standard applies to 25 and 38 mm synthetic non-percolating type
hoses having a minimum service test pressure of 2070 kPa suitable for use in
fighting forest fires. These hoses are classified as follows:
Class A - woven-jacketed synthetic fibre with an integral lining; and
Class B - rubber-covered jacket and rubber-lined.
1.2 The hose shall…
1. SCOPe
1.1 This Standard applies to 25 and 38 mm synthetic percolating type hoses
having a minimum service test pressure of 2070 kPa suitable for use in fighting
forest fires. These hoses are classified as follows:
Class A - woven-jacketed synthetic fibre with an integral lining; and
Class B - rubber-covered jacket and rubber-lined.
1.2 The hose shall be lined and…
Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard m...
Applies to laboratory standard microphones meeting the requirements of IEC 61094-1. The principles of the method are applicable to other types of microphones. In particular, microphones which fulfil the requirements of IEC 61094-1, when fitted with a special adaptor, may also be calibrated according to this standard when the adaptor is removed.
Specifies a primary method of determining the free-…
