Rechercher

This International Standard specifies a method for the measurement of curl in cut-size office papers. The test method would typically be used in evaluating papers of the type described in ISO 216. This method is limited to papers with a maximum dimension of 300 mm in both directions. The measurement may be made on papers as received, after conditioning, or after processing in a copier or printing…

This International Standard specifies the characteristics of liquid hydrogen refuelling and dispensing systems on land vehicles of all types in order to reduce the risk of fire and explosion during the refuelling procedure and thus to provide a reasonable level of protection from loss of life and property. This International Standard is applicable to the design and installation of liquid hydrogen…

1. SCOPE 1.1 This standard applies to two types¹ of diesel fuel,² SPECIAL and SPECIAL-LS (low sulphur) for use in high- and medium-speed diesel engines in underground mines. 1.1.1 Type SPECIAL fuel is intended for use where quantities of ventilating air are restricted and/or high operating temperatures exist. 1.1.2 Type SPECIAL-LS (a maximum sulfur of 0.05% by mass of the SPECIAL type…

Purpose and scope 1.1 Mobile equipment such as tractors and self-propelled sprayers are often used in agricultural operations where pesticides are present. Such operations usually require the operator to use personal protective equipment (PPE). The type of cab used to provide respiratory and skin protection is termed ECPAR - an enclosed cab for pesticide application incorporating…

1. Scope 1.1 This Standard covers mechanical couplings used to axially join pipes and fittings in nonpressure drain, waste, and vent (DWV) and sewer systems inside and outside buildings, above ground, and buried underground. Note: Caution should be used when installing mechanical couplings at low temperatures. The coupling manufacturer should be consulted. 1.2 This Standard includes…

1. Scope This Standard applies to self-ballasted lamps intended for use in lighting equipment, designed to be installed on branch circuits not exceeding 750 V and used in accordance with the rules of the Canadian Electrical Code (CEC), Part I. Note: Manufacturers designing products for use in Canada may find a helpful summary of the equipment-related requirements of the CEC, Part I, in…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10608-5:1992. 1 Scope 1.1 General This part of ISO/IEC ISP 10608 specifies subnetwork-type dependent requirements for…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10608-1:1992. 1 Scope This part of ISO/IEC ISP 10608 is applicable to end systems concerned with operating in the Open…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10608-2:1992. 1 Scope 1.1 General This part of ISO/IEC ISP 10608 specifies subnetwork-type dependent requirements for…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10608-12:1996. 1 Scope 1.1 General This part of ISO/IEC ISP 10608 is applicable to end systems and relay systems…