Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IECISP 12062-5:1997. 1 Scope 1.1 General This part of ISO/IEC ISP 12062 covers access to a message store (MS) in an Interpersonal Messaging (IPM) environment using the P7 MS Access Protocol (see also figure 1). These specifications form part of the Interpersonal Messaging application functions, as defined in the…

This National Standard of Canada is equivalent to International Standard ISO/IEC 13239:2000 (second edition, 2000-03-01). 1 Scope This International Standard specifies the frame structures, the elements of procedures, the classes of procedures, the content and format of the general purpose Exchange Identification (XID) frame, and a means for resolution/negotiation of a data link layer…

This National Standard of Canada is equivalent to International Standard ISO/IEC 13247:1997. 1 Scope This International Standard defines the signalling protocol for the purpose of basic call/connection control at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Broadband Private Integrated Services Network (B-PISN) employing…

This National Standard of Canada is equivalent to International Standard ISO/IEC 12087-3:1995 (first edition, 1995-02-15). 1 Scope This part of ISO/IEC 12087 facilitates the interchange of digital images. For this purpose, conceptual, architectural, and functional definitions of the Image Interchange Facility (IPI- IIF) are established. ISO/IEC 12087-3 consists of two major parts, the…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12072:1998. 1 Scope 1.1 General ISO/IEC ISP 10616 profiles information to be stored within the Directory which is common to a variety of applications. This International Standardized Profile augments this information with VT application specific information. Statements and conformance requirements stated…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12068-1:1996. 1 Scope 1.1 General ISO/IEC ISP 10616 profiles information to be stored within the Directory which is common to a variety of applications. ISO/IEC ISP 12068 augments this information with OSI TP specific information. Statements and conformance requirements stated in ISO/IEC ISP 10616 for…

1.1 Scope 1.1.1 This standard applies to newly produced gas-fired low-pressure steam and hot water boilers with gas inlet pressures not exceeding ½ psi (3.45 kPa) and having input ratings of less than 12,500,000 Btu per hour (3 663 389 W) (see Part IV, Definitions), hereinafter referred to as boilers*, constructed entirely of new unused parts and materials, for operation at or below the…

Describes performance requirements, test methods and classification procedures for degrees of protection provided by empty enclosures against electromagnetic disturbances for frequencies between 10 kHz and 40 GHz. The shielding protection is measured for the purpose of demonstrating that the enclosure provides adequate shielding of electromagnetic energy to support acceptable performance of the…

1. Scope 1.1 This Standard provides recommended practices for emergency sterilization in health care facilities. The term "emergency sterilization", as used herein, is synonymous with "flash sterilization" and sterilization by the "unwrapped method". These recommended practices are intended to increase assurance of sterility and to assist health care…

This Canadian Standard is based on ANSI Z136.3-1996, Second Edition, 1996-02-07. 1.1 Scope This Standard provides guidance for the safe use of lasers for diagnostic, therapeutic, and medical research applications in health care facilities. Lasers used in health care applications are incorporated into an apparatus which includes a delivery system to direct the output of the laser, a power…