Medical electrical equipment - Part 2-47: Particular requirements for the safety, including essentia...
Specifies the particular safety requirements for ambulatory electrocardiographic systems.
Within the scope of this standard are systems of the following types:
a) systems that provide continuous recording and continuous analysis of the ECG allowing full re-analysis giving essentially similar results. The systems may first record and store the ECG and analyse it later on a separate unit, or…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 ...
Gives the requirements for three types of non-heatshrinkable sleeving, extruded from PVC. Sleeving of this type is normally available with an internal diameter up to 50 mm and in a range of wall thicknesses between 0,2 mm and 1,8 mm. Each sheet covers up to three levels of wall thickness, "thin wall", "standard wall" and "thick wall" related to nominal internal…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 ...
Gives the requirements for three types of non-heat-shrinkable sleeving, extruded from PTFE. Sleeving of this type is normally available with internal diameters up to 8,53 mm and in a range of wall thicknesses between 0,15 mm and 0,51 mm. This specification covers three levels of wall thickness: "thin wall", "standard wall" and "thick wall" related to nominal internal…
Carrier Safety Management System Essentials - Guidelines to Assist in the Implementation of a Carrie...
1. Introduction
CSA Standard B619 (referred to from this point forward as #the standard# or #B619#) was developed to address the unique requirements of the trucking industry. It was designed to provide assurances to stakeholders (such as insurance companies and federal and provincial regulators) that the carrier is committed to complying with all transportation safety requirements. The…
1. Scope
1.1
This Standard applies to motor-operated liquid pump units, for use in nonhazardous, indoor, outdoor (exposed), and submerged locations, and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2
This Standard applies to
(a) pumps for either permanent or cord-connection to the source of supply;
(b) cord- and plug-connected pumps; and
(c)…
Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering
1. SCOPE
1.1
This Standard specifies the requirements for factory made rigid expanded
polystyrene insulation in the form of pipe covering and boards with or without
facings or coatings made by moulding (EPS) or extrusion (XPS) of expandable
polystyrene beads. This Standard does not apply to laminated products
manufactured with any type of rigid board facer including fibreboard, perlite…
Behavioural languages - Part 3-2: Mathematical operation in VHDL
This set of packages provides a standard for the declaration of most frequently used real and complex elementary functions required for numerically oriented modeling applications. Use of these packages with their defined data types, constants, and functions is intended to provide a mechanism for writing VHDL models (compliant with IEEE Std 1076-1993) that are portable and interoperable with other…
Behavioural languages - Part 3-3: Synthesis in VHDL
This standard supports the synthesis and verification of hardware designs, by defining vector types for representing signed or unsigned integer values and providing standard interpretations of widely used scalar VHDL values. Includes package bodies, as described in annex A, which are available in electronic format either on a diskette affixed to the back cover, or as a downloadable file from the…
Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fus...
Gives a comprehensive description of the mechanical and electrical characteristics of these fuses and of the relevant tests. Describes six types of standardized fuses: D types fuses; cylindrical fuses (types A, B, C); pin-type fuses; cylindrical fuse links (primarily used in plugs). This new publication is of equal interest to the manufacturer and to the user of fuses namely for household and…
Fusibles basse tension - Partie 3-1: Règles supplémentaires pour les fusibles destinés à être utilis...
Gives a comprehensive description of the mechanical and electrical characteristics of these fuses and of the relevant tests. Describes six types of standardized fuses: D types fuses; cylindrical fuses (types A, B, C); pin-type fuses; cylindrical fuse links (primarily used in plugs). This new publication is of equal interest to the manufacturer and to the user of fuses namely for household and…