Automatic vehicle and equipment identification — Intermodal goods transport — System parameters
ISO/TS 17263:2003 establishes an AEI-System based on radio frequency technologies. This system is intended for general application in RTTT/TICS. It allows for the transfer of the identification codes and further information about equipment and vehicles used in intermodal transport into such RTTT/TICS and information systems related to Intermodal Transport processes. Within the intermodal context…
Machinery for Forestry - Log Loaders - Location and Method of Operation of Two-Lever Operator Contro...
This National Standard of Canada is based on International Standard ISO 15078:1998 (first edition, 1998-07-01).
1 Scope
This International Standard specifies the operational pattern for log loader controls. Two alternative two-lever systems are specified.
This International Standard applies to two-lever control systems for grapple-type log loaders used in mobile and self-propelled…
1 Scope
1.1
This Standard covers the design, construction, operation, and maintenance of oil and gas industry pipeline systems that convey
a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products, natural gas liquids, and liquefied petroleum gas;
b) oilfield water;
c) oilfield steam;
d) carbon dioxide used in oilfield enhanced recovery…
1. Domaine d'application
1.1
Cette norme prescrit:
a) les exigences générales de conception;
b) les modalités de marquage et d'étiquetage des produits;
c) les modes opératoires d'essai;
d) les exigences de performance visant les moyens de déplacement à un seul passager, destinés à être transportés dans un véhicule d'un poids nominal brut du véhicule (PNBV) de moins de 7000…
Earth-moving machinery — Definitions of dimensions and codes — Part 1: Base machine
ISO 6746-1:2002 defines certain dimensions of earth-moving base-machines as well as the codes identifying those dimensions. At the same time it specifies a reference system for defining, and a coding system for identifying, additional, similar dimensions in terminology standards and commercial specifications. It is applicable to the basic types of earth-moving machinery as defined in ISO 6165.
Earth-moving machinery — Definitions of dimensions and codes — Part 2: Equipment and attachments
ISO 6746-2:2002 specifies a reference system for defining, and a coding system for identifying, equipment and attachment dimensions for earth-moving machinery in terminology standards and commercial specifications. It is applicable to the equipment and attachments of the basic types of earth-moving machinery defined in ISO 6165.
Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) -...
Applies to compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV), e.g. buried cables or cables installed in buildings, having - conductors complying with IEC 60228 and IEC 60228A with cross-sectional areas 10 mm2 and greater for copper and 16 mm2 and greater for aluminium, - a maximum continuous conductor temperature not exceeding 90 °C. This standard…
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless...
IEC 60999-2:2003 Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 60228), rigid stranded and/or flexible, having a cross-section above 35 mm2 and up to and including 300 mm2 and equivalent AWG/kcmil sizes with a rated voltage not…
ISO 18613:2003 specifies the maximum defects and damage allowed before a flat wooden pallet shall be repaired, and defines the minimum repair criteria that shall be used.
This European Standard is applicable to wooden flat pallets repaired with wood based components.
NOTE The maximum allowed defects and damage for pallets are described in this standard and the annexes A to D show examples of…
General Requirements and Methods of Testing for Nonmetallic Conduit
1 Scope
1.1
This Standard describes general requirements, apparatus, and test methods to be used in carrying out applicable tests and calculations for rigid nonmetallic conduits, elbows, bends, and associated fittings required by the rigid nonmetallic conduit Standards of the Canadian Electrical Code, Part II.
1.2
The various types of rigid nonmetallic conduits are as follows:
a) rigid…
