Sealer for Application to Asbestos-Fibre- Releasing Materials
1. SCOPE
1.1 This standard applies to a sealer used to prevent the release of asbestos fibres from asbestos-containing materials. This sealer is not suitable for highly friable materials.(1)
1.2 This standard helps the user to select a specific type and class of sealer, described in par. 3.1. It does not address concerns about any change in properties or characteristics of the material,…
1. SCOPE
1.1 This standard applies to an interior latex low gloss paint for use on walls and ceilings, either new or previously painted.
1.2 The paint is suitable for most types of wall surfaces, including wallboard, gypsum board, dry plaster, cement, brick and concrete block. For bathrooms and kitchens, coatings complying with CAN/CGSB-1.195 or CAN/CGSB-1.202,
Type 2 may be preferable…
1 Scope
1.1 This Standard applies to
(a) steam sterilizers that
(i) have a chamber volume of 42.5 L (1.5 ft3) or greater; and (ii) are intended for use in health care facilities;
(b) emergency (flash) sterilizers; and
(c) washer-disinfectors (when used in sterilizer mode).
Notes:
(1) In this Standard, <sterilizer> is used as a blanket term for the three types of…
Automatic electrical controls for household and similar use - Part 1: General requirements
In general, this standard applies to the safety of automatic electrical controls, including controls using NTC or PTC thermistors, for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof.…
Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertio...
ISO 7235:2003 specifies methods for determining
the insertion loss, in frequency bands, of ducted silencers with and without airflow,the sound power level, in frequency bands, of the flow noise (or regenerated sound) generated by ducted silencers,the total pressure loss of silencers with airflow, andthe transmission loss, in frequency bands, of air-terminal units.
The measurement procedures are…
Milk and milk products — Guidelines for the standardized description of immunoassays or receptor ass...
ISO 18330|IDF 188:2003 gives guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues in milk and milk products.
It is intended to provide a framework and basis for the evaluation/validation of tests based on the binding of an antimicrobial compound to its specific antibody or to other types of detecting molecules.
In addition to…
Non-destructive testing of welds — General rules for fusion welds in metallic materials
ISO 17635:2003 gives guidance on the selection of method(s) for non-destructive testing of fusion welds in metallic materials based on material, weld thickness, welding process, quality control requirements and extent of testing. It specifies standards to be applied to the different types of testing and general rules for either the methodology or the acceptance level for metallic materials. The…
Acoustics — Acoustic insulation for pipes, valves and flanges
ISO 15665:2003 defines the acoustic performance of three classes (classes A, B and C) of pipe insulation. It also specifies three types of construction that will meet these acoustic performance classes. Furthermore, it defines a standardized test method for measuring the acoustic performance of any type of construction, thereby allowing existing and new insulation constructions to be rated…
B45.0-02
Exigences générales relatives aux appareils sanitaires
1. Domaine d'application
1.1 Cette norme vise les appareils sanitaires suivants:
a) baignoires;
b) éviers de cuisine et de bar;
c) lavabos;
d) cuves à lessive;
e) cabines et bacs de douche;
f) fontaines et refroidisseurs;
g) toilettes;
h) bidets;
i) urinoirs;
j) toilettes sans recirculation et réservoirs de…
1. Scope
1.1 This Standard covers welding requirements for carbon and low-alloy welded steel construction, with the exception of those types listed in Clause 1.2. Requirements that are essentially common to all such structures are covered in Clauses 1 to 10, while provisions applying specifically to statically loaded structures and to cyclically loaded structures are included in Clauses 11 and…