Rechercher

In general, this standard applies to the safety of automatic electrical controls, including controls using NTC or PTC thermistors, for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof.…

ISO 7235:2003 specifies methods for determining the insertion loss, in frequency bands, of ducted silencers with and without airflow,the sound power level, in frequency bands, of the flow noise (or regenerated sound) generated by ducted silencers,the total pressure loss of silencers with airflow, andthe transmission loss, in frequency bands, of air-terminal units. The measurement procedures are…

ISO 18330|IDF 188:2003 gives guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues in milk and milk products. It is intended to provide a framework and basis for the evaluation/validation of tests based on the binding of an antimicrobial compound to its specific antibody or to other types of detecting molecules. In addition to…

ISO 17635:2003 gives guidance on the selection of method(s) for non-destructive testing of fusion welds in metallic materials based on material, weld thickness, welding process, quality control requirements and extent of testing. It specifies standards to be applied to the different types of testing and general rules for either the methodology or the acceptance level for metallic materials. The…

ISO 15665:2003 defines the acoustic performance of three classes (classes A, B and C) of pipe insulation. It also specifies three types of construction that will meet these acoustic performance classes. Furthermore, it defines a standardized test method for measuring the acoustic performance of any type of construction, thereby allowing existing and new insulation constructions to be rated…

B45.0-02 Exigences générales relatives aux appareils sanitaires 1. Domaine d'application 1.1 Cette norme vise les appareils sanitaires suivants: a) baignoires; b) éviers de cuisine et de bar; c) lavabos; d) cuves à lessive; e) cabines et bacs de douche; f) fontaines et refroidisseurs; g) toilettes; h) bidets; i) urinoirs; j) toilettes sans recirculation et réservoirs de…

1. Scope 1.1 This Standard covers welding requirements for carbon and low-alloy welded steel construction, with the exception of those types listed in Clause 1.2. Requirements that are essentially common to all such structures are covered in Clauses 1 to 10, while provisions applying specifically to statically loaded structures and to cyclically loaded structures are included in Clauses 11 and…

Gives the requirements for E-type glass sleeving using either braided or knitted construction with a continuous flexible coating based on polyvinyl chloride (PVC) or its copolymers or blends thereof. These sleevings have been found suitable up to temperatures of 105 °C. The sleeving is normally available with internal diameters between 0,3 mm and 25 mm and is normally supplied in the following…

ISO 14686:2003 describes the factors to be considered and the measurements to be made when designing and performing a pumping test, in addition to a set of guidelines for field practice to take account of the diversity of objectives, aquifers, groundwater conditions, available technology and legal contexts. The standard specifies the fundamental components required of any pumping test. It also…

ISO 14329:2003 specifies the definitions of the geometric measurements and fracture types to be used in relation to the testing of resistance spot, projection and seam welds in which different loading configurations cause different stress distributions in the weld. The aim of these definitions is to give a base for all other related standards.