Rechercher

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-032:2002, second edition. 1 Scope and object This clause of part 1 is applicable, except as follows: 1.1 Scope Replacement: This International Standard applies to the HAND-HELD and hand-manipulated CURRENT SENSORS described below. These CURRENT SENSORS are for use in the measurement of current without…

The limits and methods of measurement laid down in this International Standard apply to industrial, scientific and medical (ISM) equipment, and to electro-discharge machining (EDM) and arc welding equipment. Procedures are given for the measurement of radio-frequency disturbances and limits are laid down within the frequency range 9 kHz to 400 GHz. Requirements for ISM lighting apparatus…

This standard specifies a generic cabling for three groups of applications in homes: Information and Communications Technologies (ICT), Broadcast and Communications Technologies (BCT), and Commands, Controls and Communications in Buildings (CCCB). It is intended to guide installations in new buildings or refurbishments, and also applies where cabling is installed to support only one or two of the…

This standard is divided into six sections, each dealing with a specific example of standardized fuse for use by authorized persons: Section I: Fuses with fuse-links with blade contacts. Section II: Fuses with fuse-links for bolted connections. Section III: Fuses with fuse-links having cylindrical contact caps. Section IV: Fuses with fuse-links with offset blade contacts. Section V: Fuses with…

ISO 9349:2004 specifies the requirements and test methods applicable to preinsulated ductile iron pipes, fittings, accessories and their joints for the construction of pipelines (or parts thereof) to convey water (e.g. potable water), wastewater and other liquids, to be operated with or without pressure, to be installed below or above ground, to limit temperature variations of the conveyed fluids…

Applies to type-tested ASSEMBLIES (TTA) intended for use on construction sites, i.e. temporary places of work to which the public do not generally have access and where building construction, installation, repairs, alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out. These ASSEMBLIES may be…

This part of ISO/IEC 13888:2004 serves as a general model for subsequent parts specifying non-repudiation mechanisms using cryptographic techniques. The goal of the non-repudiation service is to generate, collect, maintain, make available and verify evidence concerning a claimed event or action in order to resolve disputes about the occurrence or non-occurrence of the event or action. There are…

This part of ISO/IEC 13888:2004 serves as a general model for subsequent parts specifying non-repudiation mechanisms using cryptographic techniques. The goal of the non-repudiation service is to generate, collect, maintain, make available and verify evidence concerning a claimed event or action in order to resolve disputes about the occurrence or non-occurrence of the event or action. There are…

ISO 15859-7:2004 specifies limits for the composition and physical properties of anhydrous hydrazine (N2H4) and establishes the sampling and test requirements applicable for the verification of the anhydrous hydrazine composition. ISO 15859-7:2004 is applicable to anhydrous hydrazine propellant, intended for use as fuel in propellant systems of space systems as well as in both flight hardware…

ISO 15859-1:2004 specifies the limit values for the composition of oxygen and establishes the sampling and test requirements applicable for the verification of the oxygen composition. ISO 15859-1:2004 is applicable to oxygen used in both flight hardware and ground facilities, systems and equipment, of the following types and grades: Type I, gaseous (Grade A: standard, purging/pressurization,…