Rechercher

1 Scope 1.1 This Standard specifies requirements for the performance, design, testing, marking, and instructions of body belts and saddles. Body belts and saddles are used as part of work positioning and travel restraint systems. 1.2 This Standard covers equipment such as (a) lineman.s body belts; (b) body belts; (c) miners. belts; and (d) arborists. saddles. 1.3 This Standard does…

1 Scope 1.1 This Standard specifies requirements for Type NS75 and NS90 neutral supported cables for use on outdoor overhead electrical systems that have nominal voltages of 600 V or less for installation in accordance with the Canadian Electrical Code, Part I. 1.2 Neutral supported cables covered by this Standard consist of up to five conductors (one, two, or three insulated phase…

This National Standard of Canada is equivalent to International Standard ISO 12117:1997. 1 Scope This International Standard establishes a consistent and reproducible means of evaluating the load-carrying characteristics of tip-over protective structures (TOPS) under static loading, and prescribes performance requirements of a representative specimen under such loading. It applies to TOPS…

This National Standard of Canada is equivalent to International Standard ISO 1996-1:2003. 1 Scope This part of ISO 1996 defines the basic quantities to be used for the description of noise in community environments and describes basic assessment procedures. It also specifies methods to assess environmental noise and gives guidance on predicting the potential annoyance response of a community to…

1 Domaine d'application 1.1 Cette norme vise trois types de membranes d'étanchéité bitumées et à base de fibres de verre (matériaux de couverture en rouleaux imprégnés ou enduits de bitume à base de fibres de verre) et recouverts d'une matière minérale insoluble: a) Type I: une membrane légère destinée à être utilisée principalement comme couche de pose pour bardeaux. b) Type…

1. SCOPE 1.1 This Standard specifies the requirements for factory made rigid expanded polystyrene insulation in the form of pipe covering and boards with or without facings or coatings made by moulding (EPS) or extrusion (XPS) of expandable polystyrene beads. This Standard does not apply to laminated products manufactured with any type of rigid board facer including fibreboard, perlite…

This part of IEC 60127 relates to universal modular fuse-links (UMF) for printed circuits and other substrate systems, used for the protection of electric appliances, electronic equipment, and component parts thereof, normally intended to be used indoors. It does not apply to fuse-links for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere.…

ISO 2302:2005 specifies physical and chemical tests on raw rubbers;standardized materials, a standardized test formulation, equipment and processing methods for evaluating the vulcanization characteristics of all types of isobutene-isoprene rubber (IIR). The precision data in ISO 2302:2005 have been taken, with permission of ASTM, from ASTM D 3188-95, Standard Test Methods for Rubber --…

ISO 176:2005 specifies two empirical methods for the quantitative determination of the loss of mass from a plastic material under defined conditions of rime and temperature, in the presence of activated carbon. Method A -- The test specimens are in direct contact with the carbon; this method is particularly useful for materials that have to be tested at relatively low temperatures because they…

ISO 9554:2005 specifies the general characteristics of fibre ropes and their constituent materials. ISO 9554:2004 is intended to be used in conjunction with the standards for the individual types of fibre rope, which cover the physical properties and specific requirements for that particular product type. ISO 9554:2005 also gives some information on the use of fibre ropes and also on their…