Rechercher

ISO/IEC 17341:2005 specifies the mechanical, physical and optical characteristics of 120 mm rewritable optical disks with capacities of 4,7 GB and 9,4 GB. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written, read and overwritten many times…

ISO/IEC 17344:2005 specifies the mechanical, physical and optical characteristics of 120 mm recordable optical disks with capacities of 4,7 gigabytes and 9,4 gigabytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written once and read many…

ISO/IEC 17346:2005 defines the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 1,3 GB per cartridge. It specifies only Type R/W for 2 048-byte sectors of such cartridges. Type R/W provides for data to be written, read and erased many times over the entire recording surface of the disk using the thermo-magnetic and magneto-optical effects. It is also referred to as "…

ISO 22868:2005 specifies a noise test code for determining, efficiently and under standardized conditions, the noise emission characteristics of portable, hand-held, combustion-engine-powered forest machines such as chain-saws, brush cutters and grass trimmers. Noise emission characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound…

ISO 1268-10:2005 specifies the general principles to be followed while injection moulding test specimens of bulk moulding compound (BMC) and gives details of mould designs for preparing one type of specimen for use in establishing reproducible moulding conditions. Where appropriate, this part of ISO 1268 may be applied to sheet moulding compound (SMC) formulated for injection moulding. Its…

ISO/IEC 17345:2005 specifies the mechanical, physical and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-optical Phase Change effects to enable data interchange between such disks. ISO/IEC 17345:2005 specifies two types: Type RW (rewritable) provides for data to be written read and erased many times over the recording surfaces of the disk.Type WORM (write…

ISO/IEC 17345:2005 specifies the mechanical, physical and optical characteristics of a 130 mm optical disk cartridge (ODC) that employs thermo-optical Phase Change effects to enable data interchange between such disks. ISO/IEC 17345:2005 specifies two types: Type RW (rewritable) provides for data to be written read and erased many times over the recording surfaces of the disk.Type WORM (write…

Scope 1.1.1 This Standard covers CGA 791 (Type I) and CGA 810 (Type II) cylinder connection devices, as defined in Part IV, Definitions, intended to connect the cylinder valve on portable LP-Gas containers to the inlet of the regulator on outdoor cooking gas appliances. These cylinder connection devices are intended for vapour withdrawal service only. 1.1.2 The cylinder connection devices…

This National Standard of Canada is equivalent to International Standard ISO/TS 17090-1:2002. 1 Scope This part of ISO/TS 17090 defines the basic concepts of a healthcare public key infrastructure (PKI) and provides a scheme of interoperability requirements to establish a PKI enabled secure communication of health information. It also identifies the major stakeholders who are…

1 Scope 1.1 This Standard applies to protective headwear for industrial, construction, mining, utility, and forestry workers. It defines the areas of the head that are to be protected and includes basic performance requirements for dielectric strength, impact attenuation, penetration resistance, passive retention (stability), and shell flammability and liner ignition resistance. 1.2 This…