Rechercher

ISO 14520-1:2005 specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plant or other structures, and the characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing medium. It covers total flooding systems primarily related to buildings, plant…

ISO/TS 14798:2006 establishes general principles and specific procedures for assessing risk. The purpose of ISO/TS 14798:2006 is to provide a process for making decisions relevant to the safety of lifts during the design, construction, and installation of lifts, lift components, and systems; developing generic procedures for the use, operation, testing, compliance verification, and servicing of…

ISO 22717:2006 gives general guidelines for the detection and identification of the specified micro-organism Pseudomonas aeruginosa in cosmetic products. Micro-organisms considered as specified in this ISO 22717:2006 might differ from country to country according to national practices or regulations. In order to ensure product quality and safety for consumers, it is advisable to perform an…

ISO 1540:2006 specifies the characteristics of electrical power supplied to the terminals of electrical utilization equipment installed in an aircraft. It is intended to support the interface definition for user equipment designed to accept electrical power on a variety of new civil aircraft applications, such as those certified via the Technical Standard Order (TSO) certification process. It…

Defines the standard interface dimensions for the type FC-PC family of connectors. The parent connector for type FC connector family is a single position plug connector set of plug/adapter configuration which is characterised by a 2,5 mm nominal ferrule diameter. It includes a thread coupling mechanism, which is spring loaded relative to the ferrule in the direction of the optical axis. The plug…

Cette norme CSA est commune avec UL 486D et NMX-J-519-ANCE-05. 1 Domaine d'application 1.1 Cette norme vise les connecteurs de fils scellés, y compris les capuchons isolants, les couvercles, les résines, les tubes et les rubans isolants qui équipent les connecteurs de fils ou pour utilisation avec ces derniers. Ces connecteurs sont conçus pour utilisation dans les emplacements mouillés ou…

This National Standard of Canada is equivalent to International Standard ISO 19900:2002. 1 Scope This International Standard specifies general principles for the design and assessment of structures subjected to known or foreseeable types of actions. These general principles are applicable worldwide to all types of offshore structures including bottom-founded structures as well as floating…

This National Standard of Canada is based on International Standard CEI/IEC CISPR 12, fifth edition, 2001-09). 1 Scope The limits in this International Standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. Compliance with this standard may not provide adequate protection for new types of radio…

ISO 8132:2006 lays down the mounting dimensions required for the interchangeability of accessories for the 16 MPa (160 bar) medium series cylinders in accordance with ISO 6020-1 and for the 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this does not…

ISO/TR 20172:2006 provides a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. It may also apply for other purposes as heat treatment, forming, non destructive testing. Types of steels in accordance with the grouping system of ISO/TR 15608:2005, Table 1. This Technical Report covers grouping systems for the following…