Rechercher

ISO 13628-6:2006 is applicable to design, fabrication, testing, installation and operation of subsea production control systems. ISO 13628-6:2006 covers surface control system equipment, subsea-installed control system equipment and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, ISO…

1. SCOPE 1.1 This is a fire test response Standard. This document describes the test method used to determine the contribution to fire growth provided by a non-loadbearing insulated building panel installed in a sprinklered or unsprinklered room configuration (see Appendix A). 1.2 The insulated building panels investigated by this test method are of the factory-assembled type and intended…

ISO 11071-2:2006 consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding regional or national deviations): CEN European Standard EN 81-2:1998, Safety rules for the construction and installation of lifts -- Part 2: Hydraulic lifts;ASME A17.1:2004, Safety Code for Elevators and Escalators and CSA B44:2004, Safety Code for…

This CSA Standard is a bi-national Standard with UL 5085-3. 1 Scope 1.1 As noted in Low Voltage Transformers - Part 1: General Requirements, UL 5085-1, or CSA C22.2 No. 66.1, Low Voltage Transformers - Part 1: General Requirements, the requirements in Part 3 cover Class 2 transformers for use with Class 2 circuits in accordance with the National Electrical Code, ANSI/NFPA 70, or the…

This CSA Standard is a bi-national Standard with UL 5085-2. 1 Scope 1.1 As noted in Low Voltage Transformers - Part 1: General Requirements, UL 5085-1, or CSA C22.2 No. 66.1, Low Voltage Transformers - Part 1: General Requirements, the requirements of Part 2 cover: a) Air-cooled transformers and reactors for general use; b) Autotransformers; c) Ferroresonant transformers; d) Cord-…

This CSA Standard is a bi-national Standard with UL 5085-1. 1 Scope 1.1 These requirements cover the following types of transformers: a) Air-cooled transformers and reactors for general use; b) General purpose autotransformers; c) Ferroresonant transformers; d) Class 2 and Class 3 transformers (which are evaluated in accordance with Part 3); e) Cord-connected transformers (which are…

IEC 62391-2:2006 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 of the measurement…

IEC 60738-1:2006 describes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic…

IEC 62391-2:2006 applies to electric double-layer capacitors for power application. Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 of the measurement…

IEC 60738-1:2006 describes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic…