Rechercher

Preface This CSA Special Publication, Ontario installation code for oil-burning equipment, includes content from CSA B139-04, Installation code for oil-burning equipment, and CAN/CSA-B139-00, Installation Code for Oil-Burning Equipment, and incorporates changes by the Technical Standards and Safety Authority (TSSA) to make the requirement suitable for adoption in Ontario. 1 Scope 1.1 This Code…

1 Scope 1.1 This Standard applies to electric supply and communication lines and equipment located entirely outside of buildings and fenced supply stations. 1.2 Existing installations, including maintenance replacements, additions, and alterations, meeting the original designs that currently comply with prior editions of this Standard, need not be modified to comply with this edition of…

This International Standard specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast. This standard covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to…

ISO 8068:2006 specifies the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system and hydraulic (water driven) turbines. This International Standard does not specify the requirements for wind turbines, which are…

ISO 8772:2006 specifies the requirements for polyethylene (PE) pipes, fittings and piping systems intended for use for non-pressure underground drainage and sewerage for the conveyance of soil and waste discharge of domestic and industrial origin, as well as surface water. It covers buried pipework, as well as piping systems buried within the building structure. In the case of industrial…

ISO 21127:2006 establishes guidelines for the exchange of information between cultural heritage institutions. In simple terms this can be defined as the curated knowledge of museums. A more detailed definition can be articulated by defining both the intended scope, a broad and maximally inclusive definition of general principles, and the practical scope, which is defined by reference to a set of…

This National Standard of Canada is based on International Standard CEI/IEC 62155:2003. 1 Scope and object 1.1 General This standard is applicable to - ceramic and glass hollow insulators intended for general use in electrical equipment; - ceramic hollow insulators intended for use with a permanent gas pressure in switchgear and controlgear. These insulators are intended for indoor…

This National Standard of Canada is equivalent to International Standard ISO 19901-1:2005. 1 Scope This part of ISO 19901 gives general requirements for the determination and use of meteorological and oceanographic (metocean) conditions for the design, construction and operation of offshore structures of all types used in the petroleum and natural gas industries. The requirements are divided…

ISO 1307:2006 specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. For this purpose, hoses are divided into four types according to the process by which they are manufactured. The standard also specifies tolerances on cut lengths of rubber and plastics hose for industrial and automotive applications. This standard is intended…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-70:2004. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of milking machines, to be used in stalls and in the open, that are designed for milking farm animals, such as cows, the rated voltage of the milking machine being not more than 250 V for…