Rechercher

Applicable to optical fibre types A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Three types of requirements apply to these fibres: -general requirements, as defined in IEC 60793-2; -specific requirements common to the category A1 multimode fibres covered in this standard and which are given in clause 3; -particular…

It provides information and rules for the preparation of detail specifications for series TMA r.f. connectors together with the pro forma blank detail specification. Series TMA connectors have a characteristic impedance of 50 Ω and are normally used with r.f. cables or microstrip in microwave fields that has a blind entry and middle low power. The connectors can be used up to a frequency of at…

ISO/TR 8550-3:2007 provides guidance for acceptance sampling of products that are supplied in lots and that can be classified as consisting of discrete items (i.e. discrete articles of product). Each item in a lot can be identified and segregated from the other items in the lot and has an equal chance of being included in the sample. Each item of product is countable and has specific…

ISO TR 8550-1:2007 gives general guidance on the selection of an acceptance sampling system, scheme or plan. It does this principally in the context of standards that either already exist or are presently under development. The guidance is confined to acceptance sampling of products that are supplied in lots and that can be classified as consisting of discrete items (i.e. discrete articles of…

ISO 8029:2007 specifies the requirements for four types of textile-reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of -10 °C to +55 °C. Such hoses are classified into four types, as follows: low pressure, designed for a maximum working pressure of up to 4,0 bar at 23 °C and up to 2,0 bar at 55 °C;medium pressure, for a maximum working…

1 Scope 1.1 General This Standard specifies special requirements for the durability aspects of the design and construction of new parking structures and parts of buildings subject to vehicular traffic. 1.2 Structure types New parking structures constructed of structural steel, reinforced concrete (including prestressed concrete), or a combination of these materials fall within the scope of this…

IEC 61937-2:2007 specifies the digital audio interface to convey non-linear PCM encoded audio bitstreams applying IEC 60958-1 and IEC 60958-3. This standard specifies burst-info which defines content information about the data contained in the burst payload. This second edition cancels and replaces the first edition published in 2000. This edition contains the following significant technical…

IEC 61937-2:2007 specifies the digital audio interface to convey non-linear PCM encoded audio bitstreams applying IEC 60958-1 and IEC 60958-3. This standard specifies burst-info which defines content information about the data contained in the burst payload. This second edition cancels and replaces the first edition published in 2000. This edition contains the following significant technical…

The limits in this International Standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. Compliance with this standard may not provide adequate protection for new types of radio transmissions or receivers used in the residential environment nearer than 10 m to the vehicle, boat or device. This…

The scope of IEC 61008-1 and IEC 61009-1 applies. This standard specifies requirements and tests for type B RCDs. Requirements and tests given in this standard are in addition to the requirements of type A residual current devices. Type B RCCBs and Type B RCBOs are able to provide protection in case of alternating residual sinusoidal currents up to 1 000 Hz, pulsating direct residual currents and…