Rechercher

1 Scope 1.1 This Standard applies to the design and manufacture of UN portable tanks and their approval by the Competent Authority of Canada. Such UN portable tanks shall have a capacity greater than 450 litres and may or may not meet the definition of #container# within the terms of the International Maritime Organization#s International Convention for Safe Containers, 1972, as amended. This…

1 Scope 1.1 This Standard specifies performance requirements for torchieres that use non-screw-in (Edison type) lamp bases and are intended primarily for residential use. 1.2 Although this Standard largely deals with fluorescent technology, it is not intended to exclude other innovative lighting technologies, e.g., light-emitting diode (LED) or high-intensity discharge (HID) lighting,…

1 Scope 1.1 This Standard applies to 60 to 250 °C single- or multiple-conductor, jacketed or unjacketed, integral or non-integral cables and single or multiple coaxial cables for telephone and other communication circuits such as voice, data, and audio for on-premise customer systems. These cables may contain one or more optical fibre members. For the purpose of this Standard, a coaxial cable or…

1.1 This Standard contains requirements for alarm initiating devices, supervisory detecting devices and accessories for automatic water supply control valves for attachment to water type extinguishing systems (such as, but not limited to wet, dry, preaction and deluge type sprinklers, residential sprinklers, water mist suppression systems, water spray fixed extinguishing systems, water motors,…

This National Standard of Canada is based on International Standard CEI/IEC 61936-1:2002. 1 Scope This part of IEC 61936 provides, in a convenient form, common rules for the design and the erection of electrical power installations in systems with nominal voltages above 1 kV a.c. and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use…

The Standard covers the design, construction, and performance of gas venting systems intended for negative or positive pressure venting of gas-fired appliances producing flue gases having temperatures under the following: (1) Class I venting systems are suitable for gas-fired appliances producing flue gas temperatures of more than 135°C but not more then 245°C; (2) Class II venting systems are…

IEC 61010-031:2008 applies to hand-held and hand-manipulated PROBE ASSEMBLIES of the types described below, and related accessories which are intended for professional, industrial process, and educational use. These PROBE ASSEMBLIES are for use in the interface between an electrical phenomenon and test or measurement equipment. They may be fixed to the equipment or be detachable accessories for…

ISO 22734-1:2008 defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen and oxygen gas. It is applicable to hydrogen generators that use the following types of ion transport medium: Group of aqueous bases;…

ISO/IEC 18000-1:2008 defines the generic architecture concepts in which item identification may commonly be required within the logistics and supply chain and defines the parameters that need to be determined in any standardized air interface definition in the subsequent parts of ISO/IEC 18000. The subsequent parts of ISO/IEC 18000 provide the specific values for definition of the air interface…

IEC 61000-3-3:2008 RLV contains the International Standard and its Redline version. The Redline version provides you with a quick and easy way to compare all the changes between this standard and its previous edition. The Redline version is not an official IEC Standard, only the current version of the standard is to be considered the official document. IEC 61000-3-3:2008 is concerned with the…