Rechercher

IEC 60204-32 applies to the application of electrical and electronic equipment and systems to hoisting machines and related equipment. The equipment covered by this standard commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) including systems for power supply and control feeders situated outside of the hoisting machine, for…

ISO 10414-1:2008 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight), viscosity and gel strength, filtration, water, oil and solids contents, sand content, methylene blue capacity, pH, alkalinity and lime content, chloride content and total hardness as calcium. ISO 10414-1:2008 provides additional test…

ISO 3828:2008 establishes the vocabulary for the various terms in use relative to ship's deck machinery. It defines, in English, general terms used in connection with this subject, and includes specific terms associated with anchoring and mooring, cargo handling, towing, ancillary deck equipment and special deck machinery of working and oceanographic research ships. In the preparation of…

1 Scope 1.1 This Standard specifies requirements for the management of low- and intermediate-level radioactive waste in solid, liquid, or gaseous states. 1.2 This Standard applies to organizations and facilities that generate, possess, manage, and transport lowand intermediate-level radioactive waste, including power reactors, research institutes, laboratories, and industrial facilities…

O80.0-08 General requirements for wood preservation 1 Scope 1.1 The CSA O80 Series of Standards specifies requirements related to the preservation and fire retardance of wood through chemical treatment (pressure and thermal impregnation). The subjects covered include materials and their analysis, pressure and thermal impregnation procedures, and fabrication and installation to put treated…

1 Scope 1.1 This Standard applies to the materials, construction, and testing of one- to four-conductor cross-linked polyethylene and ethylene propylene rubber-insulated shielded power cables, rated 5 to 46 kV, that are used for the distribution of electrical energy under normal conditions of installation and service in indoor, outdoor, aerial, underground, or underwater locations. 1.2 This…

1.1 Scope 1.1.1 This standard applies to newly produced, direct gas-fired process air heaters of the recirculating or non-recirculating type, (See Definition), hereinafter referred to as heaters, whose primary purpose is to provide process heating to non-occupied spaces within commercial and industrial buildings and may also include operation as a non-recirculating ventilation air heater, (See…

1 Scope 1.1 This Standard applies to single-conductor and multi-conductor Type RA90 and RC90 cables having a maximum temperature rating of 90 °C in both dry and wet locations and intended for installation in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 Cables covered in this Standard are intended for use on systems having nominal voltages up to 5000 V, except for 2-…

1 Scope 1.1 This Standard applies to household and commercial electrical hairdressing equipment of the portable, pedestal, and table-mounted types, including hair dryers, hair steamers, combs, curlers, and the attachments with which they are sold, rated at 250 V and less, designed for use in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This…

NB - This Standard was originally released with a 2007 publication date in error. The correct date of this 5th edition of the Standard is 2008. 1 Scope 1.1 General This Standard covers requirements for the manufacturing, inspection, testing, marking, requalification, reheat treatment, repair, and rebuilding of cylinders, spheres, and tubes (containers) for the transportation of dangerous…