Rechercher

IEC 61754-25:2008 defines the standard interface dimensions for the type RAO family of connectors.

IEC 60700-1: 2008 applies to thyristor valves with metal oxide surge arresters directly connected between the valve terminals, for use in a line commutated converter for high voltage d.c. power transmission or as part of a back-to-back link. It is restricted to electrical type and production tests. The tests specified in this standard are based on air insulated valves. This consolidated version…

1 Scope 1.1 This Standard specifies requirements for commercial and residential (a) area drains; (b) balcony drains; (c) deck drains; (d) floor drains; (e) roof drains; (f) shower drains; (g) trench drains; and (h) cleanouts. 1.2 This Standard covers the following subjects: (a) materials; (b) design requirements for (i) connections; (ii) fasteners; (iii) grates; (iv)…

1. SCOPE 1.1 This standard applies to two grades of aviation turbine fuel (Military grades F-34 and F-44) consisting entirely of petroleum-derived hydrocarbons, naturally occurring non- hydrocarbons and additives as specified herein. 1.1.1 Grade F-34 is a kerosene-type aviation turbine fuel, and grade F-44 is a high-flash kerosene-type aviation turbine fuel. Kerosene-type aviation turbine fuels…

1.1 This Standard sets forth minimum requirements for sacrificial magnesium and zinc anodes and zinc reference electrodes which are intended for use in the cathodic protection of steel underground tanks which have been coated and installed in accordance with the requirements contained in CAN/ULC-S603.1, Standard for External Corrosion Protection Systems for Steel Underground Tanks for…

ISO 21212:2008 determines the air interface for second generation (2G) cellular networks and 2G systems (e.g. using WAP and I-Mode type protocols) to be compliant to CALM, i.e., requirements that must be met before a 2G system can be incorporated into a CALM system. In particular, it specifies protocols and parameters that 2G systems shall include to support prolonged, long-range, high data rate…

ISO 28702:2008 specifies a test method for measuring the low-temperature brittleness of rubber and plastics hoses with a textile reinforcement and tubing at sub-ambient temperatures by crushing a test piece of the hose. This International Standard is only applicable to hoses with a nominal bore up to and including 100 mm.

IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method takes into account the effect of voltage and current variation. It is applicable to all types of metering equipment for energy measurement, tariff…

IEC 62433-2:2008 specifies macro-models for ICs to simulate conducted electromagnetic emissions on a printed circuit board. The model is commonly called Integrated Circuit Emission Model - Conducted Emission (ICEM-CE). The ICEM-CE model can also be used for modelling an IC-die, a functional block and an Intellectual Property block (IP). The ICEM-CE model can be used to model both digital and…

IEC 60794-2-30:2008 is a family specification which covers optical fibre ribbon cables for indoor use. The requirements of the sectional specification IEC 60794-2 are applicable to cables covered by this standard. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. The main changes are listed below:<br /> - subclause 5.4 has…