Lifts (elevators), escalators and moving walks — Risk assessment and reduction methodology
ISO 14798:2009 establishes general principles and specific procedures for assessing risk. Its purpose is to provide a process for making decisions relevant to the safety of lifts during the
design, construction, installation and servicing of lifts, lift components and systems,
development of generic procedures for the use, operation, testing, compliance verification and servicing…
Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61477:2009 gives the minimum requirements relative to specification, manufacture, selection, application and maintenance of tools, devices and equipment for live working. It provides the type of information which is useful to skilled persons in order to make the use of tools, devices and equipment safer. This type of information includes:
- the characteristics of tools, devices and equipment…
Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of labo...
IEC 61094-2:2009 is applicable to laboratory standard microphones meeting the requirements of IEC 61094-1 and other types of condenser microphone having the same mechanical dimensions and specifies a primary method of determining the complex pressure sensitivity so as to establish a reproducible and accurate basis for the measurement of sound pressure. This second edition cancels and replaces the…
Industrial automation systems and integration — Exchange of characteristic data — Part 5: Identifica...
ISO/TS 29002-5:2009 specifies the data elements and a syntax for an
unambiguous identifier for an administered item. The identifier is
called an "international registration data identifier" (IRDI), as
specified in ISO/IEC 11179-5. An administered item is any registry
item for which administrative information is recorded. For the
purposes of ISO/TS 29002-5:2009, an administered item can…
ISO 1891:2009 provides translation guidance for terms commonly used to describe fasteners. ISO 1891:2009 lays down the terminology of fasteners in English, French and Russian, recommended for use unless otherwise specified in the appropriate product standard.
At present, not all of the fasteners listed are covered by ISO documents. For the main part, the items have been selected from existing…
Gas Water Heaters: Volume I, Storage Water Heaters With InputRatings Of 75,000 Btu Per Hour Or Less
1.1 Scope
1.1.1
This standard applies to newly produced, automatic storage water heaters having input ratings of 75,000
Btu/hr (21 980 W) or less (see Part IV, Definitions), hereinafter referred to as water heaters or appliances,
constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use with manufactured gas;
c. For use with mixed gas;
d. For use…
Petroleum and natural gas industries - Fixed steel offshore structures
This National Standard of Canada is based on International Standard ISO 19902:2007.
Scope
This International Standard specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries:
- caissons, free-standing and braced;
- jackets;
- monotowers;
- towers.
In addition, it is applicable…
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (an...
ISO 4642-2:2009 specifies the requirements and test methods for semi-rigid reel hoses for use on fire fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes.
ISO 4642-2:2009 applies to delivery hoses…
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece ...
ISO 11414:2009 specifies a method for preparing butt-fusion-jointed test piece assemblies between polyethylene (PE) pipes and spigot-ended fittings.
ISO 11414:2009 specifies the assembly parameters involved, such as the ambient temperature, joint geometry and fusion parameters, taking into account the service condition limits specified in the relevant product standards, as well as the type of…
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers...
ISO 1628-1:2009 defines the general conditions for the determination of the reduced viscosity, intrinsic viscosity and K‑value of organic polymers in dilute solution. It defines the standard parameters that are applied to viscosity measurement, and can be used to develop standards for measuring the viscosities in solution of individual types of polymer. It can also be used to measure and report…