Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic em...
IEC 60645-6:2009 applies to instruments designed primarily for the measurement of otoacoustic emissions in the human external acoustic meatus evoked by acoustic probe pulses or tones. This standard defines the characteristics to be specified by the manufacturer, lays down performance specifications for two types of instruments and specifies the functions to be provided on these types. IEC 60645-6…
Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brain...
IEC 60645-7:2009 applies to instruments designed for the measurement of auditory evoked potentials from the inner ear, the auditory nerve and the brainstem, evoked by acoustic and/or vibratory stimuli of short duration. IEC 60645-7:2009 defines the characteristics to be specified by the manufacturer, specifies performance requirements for two types of instrument, screening and diagnostic, and…
Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement type
ISO 81060-2:2009 is applicable to all sphygmomanometers that sense or display pulsations, flow or sounds for the estimation, display or recording of blood pressure. These sphygmomanometers need not have automatic cuff inflation. ISO 81060-2:2009 covers sphygmomanometers intended for use in all patient populations (e.g. all age and weight ranges), and all conditions of use (e.g. ambulatory blood…
Textiles — Method for assessing appearance of apparel and other textile end products after domestic ...
ISO 15487:2009 specifies a method of test for evaluating the smoothness appearance of flat fabric and seams, and the retention of pressed-in creases in garments and other textile products after one or several domestic washing and drying treatments. It is applicable to any washable textile end product of any fabric construction. Techniques for seaming and creasing are not included since the…
Fibre-cement slates and fittings — Product specification and test methods
ISO 9125:2009 specifies technical requirements and methods for the inspection and testing of fibre-cement slates and shingles and their fibre-cement fittings, designed to protect the weather-exposed surfaces on roofs and claddings of buildings.
Products covered by ISO 9125:2009 can be used for other purposes provided they comply with the appropriate national or international application code or…
ISO 679:2009 specifies a method of determining the compressive and, optionally, the flexural strength of cement mortar containing one part by mass of cement, three parts by mass of ISO standard sand and one half part of water. ISO 679:2009 applies to common cements and to other cements and materials, the standards for which call up this method. ISO 679:2009 might not apply to other cement types…
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-base...
ISO 1436:2009 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from to -40 °C to +60 °C or oil-based hydraulic fluids HH, HL, HM, HR and…
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-bas...
ISO 3862:2009 specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from -40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging…
Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based f...
ISO 4079:2009 specifies requirements for five types of textile-reinforced hydraulic hose and hose assembly of nominal size from 5 to 100. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from -40 °C to +60 ºC or oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from…
Liquid crystal display devices - Part 5-3: Environmental, endurance and mechanical test methods - Gl...
IEC 61747-5-3:2009 applies to commercially available liquid crystal displays (LCDs). This standard applies to all LCD types, including transmissive, reflective or transflective liquid crystal display (LCD) modules using either segment, passive or active matrix and achromatic or colour type LCDs that are equipped with their own integrated source of illumination or without their own source of…