Rechercher

Scope 1.1 This Standard applies to (a) heater elements for use in equipment that is intended to be connected to a supply of nominal system voltage of 600 V or less; and (b) those heater 1.2 This Standard applies to the following types of heater elements: (a) open wire (including wire, ribbon, and expanded metal); (b) metal sheathed (including removable-type range surface and grounded plug-in…

1 General 1.1 Scope and object The limits and methods of measurement laid down in this International Standard apply to industrial, scientific and medical (ISM) equipment as defined in Clause 2, and to electrodischarge machining (EDM) and arc welding equipment. NOTE The limits have been determined on a probabilistic basis taking into account the likelihood of interference. In cases of…

CSA Preface This is the second edition of CAN/CSA-ISO 9004, Managing for the sustained success of an organization - A quality management approach, which is an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 9004 (third edition, 2009-11-01). It supersedes the previous edition published in 2000 as CAN/CSA-ISO 9004, Quality…

Scope 1.1 This Standard applies to portable, pressurized-type, liquid-petroleum-fuelled camp stoves with one or more surface burners. 1.2 This Standard applies to camp stoves intended for use outdoors only. 1.3 This Standard may be applied to camp stoves using alcohol-type fuel with a pressurized fuel system. 1.4 The values given in SI units are the units of record for the…

Scope 1.1 This Standard applies to portable, pressurized-type, liquid-petroleum-fuelled lamps and lanterns with one or more burners. Note: The term "device" as used in this Standard refers to both lamps and lanterns as defined in Clause 3. The term "lamp" or "lantern" is used where specific reference is intended. 1.2 This Standard applies to devices…

IEC 60079-15:2010 specifies requirements for the construction, testing and marking for Group II electrical equipment with type of protection, "n" intended for use in explosive gas atmospheres. This standard applies to electrical equipment where the rated voltage does not exceed 15 kV r.m.s. a.c. or d.c. This standard supplements and modifies the general requirements of IEC 60079-0,…

IEC 62489-1:2010 applies to the components of audio-frequency induction-loop systems for assisted hearing. It may also be applied to such systems used for other purposes, as far as it is applicable. This standard is intended to encourage accurate and uniform presentation of manufacturers' specifications, which can be verified by standardized methods of measurement. It is intended for type…

IEC 60747-14-1:2009 describes general items concerning the specifications for sensors, which are the basis for specifications given in other parts of this series for various types of sensors. Sensors described in this standard are basically made of semiconductor materials, however, the statements made in this standard are also applicable to sensors using materials other than semiconductor, for…

IEC 61391-2:2010 defines terms and specifies methods for measuring the maximum depth of penetration and the local dynamic range of real time ultrasound B MODE scanners. The types of transducers used with these scanners include:<br /> - mechanical probes;<br /> - electronic phased arrays;<br /> - linear arrays;<br /> - curved arrays;<br /> - two-dimensional arrays;…

IEC 61231:2010 gives the rules for the international lamp coding system and covers all lamp categories, excluding vehicle lamps. Coding for the main lamp types is specified and, for the others, will follow by amendments to this standard as appropriate. This first edition cancels and replaces the second edition of IEC 61231, published as a technical specification. It constitutes a technical…