Rechercher

1. This Specification is intended to apply to power-operated radio transmitting equipment* designed to be used on standard supply circuits in accordance with the rules of Part I of this Code. This will include all types of radio transmitting equipment irrespective of the type of modulation employed.

201.1.1 * Scope Replacement: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME…

1 Scope The requirements of the IEC 61241 series of Standards cover protection techniques with respect to dust explosion and layer ignition hazards only. The CAN/CSA-C22.2 No. 61241 series of Standards (based on the adoption of corresponding IEC Standards) is to be used in conjunction with other applicable Part II Standards containing the appropriate electrical safety requirements for general…

1 Scope The requirements of the IEC 60079 series of Standards cover protection techniques with respect to explosion hazard only. The CAN/CSA-C22.2 No. 60079 series of Standards (based on the adoption of corresponding IEC Standards) is to be used in conjunction with other applicable Part II Standards containing the appropriate electrical safety requirements for general use equipment. General…

1 Scope This International Standard specifies requirements, test methods, marking and information to be supplied by the manufacturer for descending devices. It also specifies some basic requirements for the descent lines to be used with the descending devices. This International Standard is applicable to automatic and manually operated descending devices intended for use in the workplace in…

1 Scope 1.1 This Standard specifies performance, design, testing, marking, classification, and other requirements related to anchorage connectors in travel restraint, fall arrest, work positioning, and suspended component/tie-back line systems. 1.2 The requirements of this Standard include (where applicable) anchorage connectors attached to an anchorage. Methods of verifying the actual strength…

1 Effective sterilization processing 1.1 Introduction Effective sterilization processing is critical to the successful outcome of the thousands of sterile procedures that are performed daily at health care institutions and clinics throughout North America. This requires that reusable surgical instruments and medical devices be effectively cleaned, inspected, packaged, labelled, sterilized…

1 Scope 1.1 General This Standard specifies requirements for workplace electrical safety necessary for the practical safeguarding of workers during activities such as the installation, inspection, operation, maintenance, and demolition of electric conductors and electric equipment, as well as work in proximity of energized electrical equipment. 1.2 Application While it can be applied by…

1 Scope 1.1 This Standard specifies energy efficiency and performance requirements for LED luminaires of the directional and non-directional type used for general illumination, including those with a significant decorative function. 1.2 This Standard does not cover LED products (a) intended for indication, e.g., traffic lights and exit signs; (b) exclusively intended for decoration, e.g.,…

IEC 60076-21:2011/IEEE Std C57.15:2009 - Description of design types, tables of 50 Hz and 60 Hz ratings, supplementary ratings, construction, and available accessories are provided. Methods for performing routine and design tests applicable to liquid-immersed single and three-phase step-voltage regulators are described. Winding resistance measurements, polarity tests, insulation power factor and…