Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
IEC 60204-32:2023 applies to electrical, electronic, programmable electronic equipment and systems to hoisting machines and related equipment, including a group of hoisting machines working together in a co-ordinated manner. The equipment covered by this document commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) and…
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
IEC 60204-32:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60204-32:2023 edition 3.0 and the previous IEC 60204-32:2023:2008 edition 2.0. Furthermore, comments from IEC TC 44 experts are provided to explain the reasons of the most relevant changes, or to clarify any part…
1 Scope
1.1 General
This Standard concerns high-pressure containers for the on-board storage of natural gas as a fuel for automotive vehicles.
This Standard contains requirements for the material, design, manufacture, and testing of serially produced, refillable Type NGV 2 containers intended for the storage of compressed natural gas (CNG) for vehicle operation. These containers are to be…
1 Scope
1.1 General
This Standard applies to the protection of workers from the hazards arising from the use of mobile or stationary machinery. It provides the criteria to be observed and the description, selection, and application of guards and protective devices. Where a current CSA standard exists for a specific type of machinery (e.g., CSA B167, CAN/CSA-B354.2, CSA M424.1, CSA Z142, CSA…
Electrical safety requirements for cranes and hoists
1 Scope
1.1
This Standard applies to all types of electric cranes, including electric overhead travelling cranes, and hoists for vertical lifting and lowering of freely suspended load for voltages of 750 V and less between conductors. The equipment specified in this Standard is intended for installation in accordance with the Canadian Electrical Code, Part I.
1.2
This Standard applies to the…
Scope
This National Standard of Canada applies to four types of middle distillate fuel oils that are suitable for use in liquid
fuel burning equipment without preheating [types 0, 1, 2 and 2(B6-B20)], and three types of fuel oils that contain
residual fuel components that require preheating (types 4, 5 and 6).
The heating fuel oils covered by this standard are intended for use in oil burning…
Pedestrian, cycling, and multiuse bridge design guideline
1 Scope
1.1 Scope of Guideline
This Guideline applies to the design, evaluation, and structural rehabilitation design of standalone pedestrian, cycling, and multiuse bridges in Canada. The Guideline also includes technical clauses related to geometric design, accessibility, safety, durability, and sustainability.
There is no limit on span, but this Guideline does not necessarily cover all…
Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with fluorop...
IEC 61196-8:2023 specifies the materials and cable construction for semi-flexible coaxial communication cables with fluoropolymer dielectric, IEC type designation, identification, marking and labelling, standard rating and characteristics, requirements of finished cables, quality assessment, delivery and storage, etc.
This document applies to semi-flexible coaxial communication cables with…
Coaxial communication cables - Part 9: Sectional specification for flexible RF coaxial cables
IEC 61196-9:2023 specifies the materials and cable construction for RF flexible coaxial communication cables with solid or with semi-air-spaced dielectric, IEC type designation, identification, marking and labelling, standard rating and characteristics, requirements of finished cables, quality assessment, delivery and storage, etc.
This document applies to RF flexible coaxial communication…
Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on ...
This document specifies a data model and encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries (including national, academic, public, corporate, special, and school libraries). The rules for encoding a subset of data elements taken from the total set of data elements defined in ISO 28560-1 are based on ISO/IEC 15962…